I am after the two fuel hoses - one from the pump to the filter and the other one from filter to feed pipe.
Not bothered about condition, as I just need them as patterns so that I can get some replacements made up before I change mine.
Early 944 flexi fuel hoses
Moderator: Moderators
-
CG_Pete
- Posts: 18
- Joined: Fri May 12, 2017 9:33 pm
- TIPEC membership: 0
- Location: Midlands
- Contact:
Re: Early 944 flexi fuel hoses
I've had all of my hoses made up in braided pipe and anodised fittings by a company close to me, Nuneaton Hose and Fitting. I asked them to keep a copy of my invoice so that other 924/944 owners could have them made too, as I'd supplied them all the lengths and fitting types.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
-
Acc8braman
- Posts: 63
- Joined: Mon Mar 06, 2017 8:48 am
- TIPEC membership: 0
- Location: Raunds, Northamptonshire
Re: Early 944 flexi fuel hoses
Hi,CG_Pete wrote:I've had all of my hoses made up in braided pipe and anodised fittings by a company close to me, Nuneaton Hose and Fitting. I asked them to keep a copy of my invoice so that other 924/944 owners could have them made too, as I'd supplied them all the lengths and fitting types.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
I would be interested in this info and maybe something I need to do later this year.
Thanks
Steve
-
jefft
- Posts: 63
- Joined: Sun Jan 22, 2012 5:18 pm
- Location: Somerset
Re: Early 944 flexi fuel hoses
Sorry, only just seen your reply. Thanks for the offer, but I went down the genuine route as I needed to get my car through the MOT and time was against me.CG_Pete wrote:I've had all of my hoses made up in braided pipe and anodised fittings by a company close to me, Nuneaton Hose and Fitting. I asked them to keep a copy of my invoice so that other 924/944 owners could have them made too, as I'd supplied them all the lengths and fitting types.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
Would be worth putting the info up though as no doubt other owners will find it really helpful.
Thanks again,
Jeff