Early 944 flexi fuel hoses

Sell, Swap and ask for Parts here. Traders and Breakers posts will be deleted.

Moderator: Moderators

Post Reply
jefft
Posts: 63
Joined: Sun Jan 22, 2012 5:18 pm
Location: Somerset

Early 944 flexi fuel hoses

Post by jefft »

I am after the two fuel hoses - one from the pump to the filter and the other one from filter to feed pipe.
Not bothered about condition, as I just need them as patterns so that I can get some replacements made up before I change mine.
CG_Pete
Posts: 18
Joined: Fri May 12, 2017 9:33 pm
TIPEC membership: 0
Location: Midlands
Contact:

Re: Early 944 flexi fuel hoses

Post by CG_Pete »

I've had all of my hoses made up in braided pipe and anodised fittings by a company close to me, Nuneaton Hose and Fitting. I asked them to keep a copy of my invoice so that other 924/944 owners could have them made too, as I'd supplied them all the lengths and fitting types.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
Acc8braman
Posts: 63
Joined: Mon Mar 06, 2017 8:48 am
TIPEC membership: 0
Location: Raunds, Northamptonshire

Re: Early 944 flexi fuel hoses

Post by Acc8braman »

CG_Pete wrote:I've had all of my hoses made up in braided pipe and anodised fittings by a company close to me, Nuneaton Hose and Fitting. I asked them to keep a copy of my invoice so that other 924/944 owners could have them made too, as I'd supplied them all the lengths and fitting types.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
Hi,

I would be interested in this info and maybe something I need to do later this year.

Thanks
Steve
jefft
Posts: 63
Joined: Sun Jan 22, 2012 5:18 pm
Location: Somerset

Re: Early 944 flexi fuel hoses

Post by jefft »

CG_Pete wrote:I've had all of my hoses made up in braided pipe and anodised fittings by a company close to me, Nuneaton Hose and Fitting. I asked them to keep a copy of my invoice so that other 924/944 owners could have them made too, as I'd supplied them all the lengths and fitting types.
I think I might still have the old pipes that you need in a box at the workshop, if I have you're more than welcome to have them, or I can measure them and let you know the lengths.
Sorry, only just seen your reply. Thanks for the offer, but I went down the genuine route as I needed to get my car through the MOT and time was against me.

Would be worth putting the info up though as no doubt other owners will find it really helpful.

Thanks again,
Jeff
Post Reply