Breaking 944 S2

Sell, Swap and ask for Parts here. Traders and Breakers posts will be deleted.

Moderator: Moderators

Post Reply
phido
Posts: 1
Joined: Sun Mar 30, 2014 6:39 am
TIPEC membership: 0

Re: Breaking 944 S2

Post by phido »

Looking for:
S2 engine
S2 DME
S2 AFM
S2 wiring harness all wiring in engine bay
S2 flywheel
S2 throttle cable
S2 clutch
S2 gearbox

but needs to be packed up and sent to Australia. I will be able to enlist the help of a packing company to properly pack it up. Have you still got these items?
Top
mr2haz
Posts: 175
Joined: Sun Apr 17, 2011 7:20 pm
TIPEC membership: 0
Location: Essex

Re: Breaking 944 S2

Post by mr2haz »

The heater control panel has gone but the car did not have air con.
Top
User avatar
Porker
Posts: 268
Joined: Sun Feb 24, 2013 7:01 pm
TIPEC membership: 6855
Location: Nottingham
Contact:
Contact Porker

Re: Breaking 944 S2

Post by Porker »

OK thanks for confirming :)
944 Turbo 87E Zermatt Silver
968 M030 Koni dampers & ARBs, Head & Drivetrain, Clutch & flywheel, Dual port wastegate, Chips, 3bar FPR, 928 Fuel pump, 993 Dump valve, Water pump, Calipers, AFM & airbox, TPS, Dinitrol, Shifter, Wheels
Top
User avatar
s2sam
Posts: 34
Joined: Wed Aug 25, 2010 6:14 pm
TIPEC membership: 0

Re: Breaking 944 S2

Post by s2sam »

hi im after the pop up light motor relay 5 pin type .its on the motor itself under rubber cover part no 944.615.202.00 thanks sam
944s2 coupe alpine White
Dutton malaga 2.0 fiat 131 twin cam
986 boxster 3.2 s seal grey 04
Top
mr2haz
Posts: 175
Joined: Sun Apr 17, 2011 7:20 pm
TIPEC membership: 0
Location: Essex

Re: Breaking 944 S2

Post by mr2haz »

Bump.

I really should get round to getting this gone.
Top
User avatar
Porker
Posts: 268
Joined: Sun Feb 24, 2013 7:01 pm
TIPEC membership: 6855
Location: Nottingham
Contact:
Contact Porker

Re: Breaking 944 S2

Post by Porker »

does it have a functioning black boot privacy screen roller whatsit? Mine now stops rolling with about 12 inches to go and I have no desire to drill out rivets to wind the spring

ta
944 Turbo 87E Zermatt Silver
968 M030 Koni dampers & ARBs, Head & Drivetrain, Clutch & flywheel, Dual port wastegate, Chips, 3bar FPR, 928 Fuel pump, 993 Dump valve, Water pump, Calipers, AFM & airbox, TPS, Dinitrol, Shifter, Wheels
Top
mr2haz
Posts: 175
Joined: Sun Apr 17, 2011 7:20 pm
TIPEC membership: 0
Location: Essex

Re: Breaking 944 S2

Post by mr2haz »

Porker wrote:does it have a functioning black boot privacy screen roller whatsit? Mine now stops rolling with about 12 inches to go and I have no desire to drill out rivets to wind the spring

ta
I have the part but it has also stopped retracting so would require a rebuild.
Top
User avatar
Porker
Posts: 268
Joined: Sun Feb 24, 2013 7:01 pm
TIPEC membership: 6855
Location: Nottingham
Contact:
Contact Porker

Re: Breaking 944 S2

Post by Porker »

OK thanks anyway :) I have the Clark's guide
944 Turbo 87E Zermatt Silver
968 M030 Koni dampers & ARBs, Head & Drivetrain, Clutch & flywheel, Dual port wastegate, Chips, 3bar FPR, 928 Fuel pump, 993 Dump valve, Water pump, Calipers, AFM & airbox, TPS, Dinitrol, Shifter, Wheels
Top
Hallsy
Posts: 392
Joined: Wed Dec 05, 2012 9:04 am
TIPEC membership: 0

Re: Breaking 944 S2

Post by Hallsy »

Mr2haz - do you have the collapsible spare wheel?
Top
mr2haz
Posts: 175
Joined: Sun Apr 17, 2011 7:20 pm
TIPEC membership: 0
Location: Essex

Re: Breaking 944 S2

Post by mr2haz »

Hallsy wrote:Mr2haz - do you have the collapsible spare wheel?
Sorry there is no spare wheel available.
Top
nikisporsche
Posts: 1
Joined: Fri Aug 22, 2014 11:20 am
TIPEC membership: 0

Re: Breaking 944 S2

Post by nikisporsche »

I am looking for an engine S2 3.0ltr is it still available?
Top
mr2haz
Posts: 175
Joined: Sun Apr 17, 2011 7:20 pm
TIPEC membership: 0
Location: Essex

Re: Breaking 944 S2

Post by mr2haz »

nikisporsche wrote:I am looking for an engine S2 3.0ltr is it still available?

It is, PM coming your way.
Top
944-Scott
Posts: 868
Joined: Thu Jun 23, 2011 11:13 pm
TIPEC membership: 0

Re: Breaking 944 S2

Post by 944-Scott »

mr2haz wrote:
nikisporsche wrote:I am looking for an engine S2 3.0ltr is it still available?

It is, PM coming your way.
I hope this works out as a good deal for both of you :wink:
Top
Oct
Posts: 71
Joined: Mon Sep 06, 2010 2:47 pm
TIPEC membership: 0
Location: Oxfordshire
Contact:
Contact Oct

Re: Breaking 944 S2

Post by Oct »

Are you able to cut any panels out? Specifically near side rear wheel arch?
Top
mr2haz
Posts: 175
Joined: Sun Apr 17, 2011 7:20 pm
TIPEC membership: 0
Location: Essex

Re: Breaking 944 S2

Post by mr2haz »

I don't see why not but wouldn't cut anything without the engine selling first.
Top
Post Reply

Return to “Parts for Sale/Wanted/Swap”