Breaking 944 S2
Moderator: Moderators
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Breaking 944 S2
Breaking a 944 S2. As I am trying to keep it looking complete for as long as possible so I will start with the interior bits.
-
fire3500
- Posts: 190
- Joined: Sun Aug 04, 2013 6:38 pm
- TIPEC membership: 0
- Location: Redbourne, N.Lincs.
Re: Breaking 944 S2
Hiya,mr2haz wrote:Breaking a 944 S2. As I am trying to keep it looking complete for as long as possible so I will start with the interior bits.
Can you please give me a price for a few bits please, assuming it's a coupe?
If it is a non-AC car - heater control panel and facia
Sunvisor clips
Seat tilt levers (might be interested in the f & r seats actually...)
Rear boot blind (nosy persons cover)
Rear light lenses
Sunroof interior panel (if black)
Boot carpet side clips (mushroom shaped ones) (if black)
Cheers dude!
---------------------------
1989 Porsche 944 Lux
1989 Porsche 944 Lux
-
stevew
- Posts: 122
- Joined: Sun Jul 21, 2013 7:11 pm
- TIPEC membership: 0
Re: Breaking 944 S2
PM'd for interior
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Re: Breaking 944 S2
PMs sent.
It is a silver coupe with linen leather interior.
It is a silver coupe with linen leather interior.
-
t3rra
- Posts: 2381
- Joined: Sun Jan 24, 2010 12:07 am
- TIPEC membership: 0
Re: Breaking 944 S2
Do you have a passangers fog light, mine as acquired a stone chip.
If you could email me a price and pic
Tdppwgjdpp@aol.com
Thanks
If you could email me a price and pic
Tdppwgjdpp@aol.com
Thanks
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Re: Breaking 944 S2
There are no front end parts available.
-
pad944968
- Posts: 151
- Joined: Fri Oct 29, 2010 10:27 pm
- TIPEC membership: 6497
Re: Breaking 944 S2
Hi
Do you still have the radiator?
Thanks
Do you still have the radiator?
Thanks
968 Sport
944 Turbo can
944 Turbo - Titanium (long gone)
968 Cab (gone)
944 Turbo can
944 Turbo - Titanium (long gone)
968 Cab (gone)
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Re: Breaking 944 S2
I do have the radiator and it does look undamaged but am unsure if it can be removed from the mangled front end in one piece. l try to take it off this weekend and let you know how I get on.pad944968 wrote:Hi
Do you still have the radiator?
Thanks
-
Gunscrossed
- Posts: 78
- Joined: Thu Oct 17, 2013 9:46 pm
- TIPEC membership: 0
Re: Breaking 944 S2
Is the gear knob/gaiter black and in good condition? If so price plese.
1996 986
-
ryan 944
- Posts: 124
- Joined: Sun Mar 30, 2008 7:45 pm
- TIPEC membership: 5267
- Location: Stafford
Re: Breaking 944 S2
Hi,
is the lower batwing of the front bumper any good? if so how much
cheers Ryan
is the lower batwing of the front bumper any good? if so how much
cheers Ryan
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Re: Breaking 944 S2
I think it is brown. I will get pictures in the next few days.Gunscrossed wrote:Is the gear knob/gaiter black and in good condition? If so price plese.
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Re: Breaking 944 S2
It is no good.ryan 944 wrote:Hi,
is the lower batwing of the front bumper any good? if so how much
cheers Ryan
-
neal
- Posts: 92
- Joined: Tue Nov 13, 2007 4:22 pm
Re: Breaking 944 S2
Hi,
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal
-
mr2haz
- Posts: 175
- Joined: Sun Apr 17, 2011 7:20 pm
- TIPEC membership: 0
- Location: Essex
Re: Breaking 944 S2
B pillar black vinyl covers are there.neal wrote:Hi,
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal
Is it the screw fixings that hold the rear quarter trim panels you are looking for? If so they will be inside the car somewhere as I have removed the trims.
It is not the bridge spoiler model.
The original tyre compressor is not present.
Seats are provisionally sold.
Rubber covers will be required on my own car.
-
neal
- Posts: 92
- Joined: Tue Nov 13, 2007 4:22 pm
Re: Breaking 944 S2
Yes, the screws and cup washers which hold the speaker panel on, underneath the side window. How much would they be and both B post vinyls (if they are perfect)
Thanks Neal
Thanks Neal