Porsche Enthusiasts Club Forum

It is currently Wed Jun 25, 2025 11:19 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 48 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
 Post subject: Breaking 944 S2
PostPosted: Sun Nov 03, 2013 8:01 pm 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
Breaking a 944 S2. As I am trying to keep it looking complete for as long as possible so I will start with the interior bits.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Sun Nov 03, 2013 8:46 pm 
Offline

Joined: Sun Aug 04, 2013 5:38 pm
Posts: 190
Location: Redbourne, N.Lincs.
TIPEC membership: 0
mr2haz wrote:
Breaking a 944 S2. As I am trying to keep it looking complete for as long as possible so I will start with the interior bits.


Hiya,

Can you please give me a price for a few bits please, assuming it's a coupe?

If it is a non-AC car - heater control panel and facia
Sunvisor clips
Seat tilt levers (might be interested in the f & r seats actually...)
Rear boot blind (nosy persons cover)
Rear light lenses
Sunroof interior panel (if black)
Boot carpet side clips (mushroom shaped ones) (if black)

Cheers dude!

_________________
---------------------------
1989 Porsche 944 Lux


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Sun Nov 03, 2013 8:51 pm 
Offline

Joined: Sun Jul 21, 2013 6:11 pm
Posts: 122
TIPEC membership: 0
PM'd for interior


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Sun Nov 03, 2013 9:54 pm 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
PMs sent.

It is a silver coupe with linen leather interior.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Sun Nov 03, 2013 11:01 pm 
Offline

Joined: Sun Jan 24, 2010 12:07 am
Posts: 2381
TIPEC membership: 0
Do you have a passangers fog light, mine as acquired a stone chip.

If you could email me a price and pic
Tdppwgjdpp@aol.com

Thanks

_________________
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Sun Nov 03, 2013 11:15 pm 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
There are no front end parts available.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 7:36 am 
Offline

Joined: Fri Oct 29, 2010 9:27 pm
Posts: 151
TIPEC membership: 6497
Hi

Do you still have the radiator?

Thanks

_________________
968 Sport
944 Turbo can
944 Turbo - Titanium (long gone)
968 Cab (gone)


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 7:44 am 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
pad944968 wrote:
Hi

Do you still have the radiator?

Thanks


I do have the radiator and it does look undamaged but am unsure if it can be removed from the mangled front end in one piece. l try to take it off this weekend and let you know how I get on.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 11:05 am 
Offline

Joined: Thu Oct 17, 2013 8:46 pm
Posts: 78
TIPEC membership: 0
Is the gear knob/gaiter black and in good condition? If so price plese.

_________________
1996 986


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 12:07 pm 
Offline

Joined: Sun Mar 30, 2008 6:45 pm
Posts: 124
Location: Stafford
TIPEC membership: 5267
Hi,

is the lower batwing of the front bumper any good? if so how much

cheers Ryan


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 6:42 pm 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
Gunscrossed wrote:
Is the gear knob/gaiter black and in good condition? If so price plese.


I think it is brown. I will get pictures in the next few days.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 6:43 pm 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
ryan 944 wrote:
Hi,

is the lower batwing of the front bumper any good? if so how much

cheers Ryan


It is no good.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 6:53 pm 
Offline

Joined: Tue Nov 13, 2007 4:22 pm
Posts: 92
Hi,
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 7:43 pm 
Offline

Joined: Sun Apr 17, 2011 6:20 pm
Posts: 175
Location: Essex
TIPEC membership: 0
neal wrote:
Hi,
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal


B pillar black vinyl covers are there.
Is it the screw fixings that hold the rear quarter trim panels you are looking for? If so they will be inside the car somewhere as I have removed the trims.
It is not the bridge spoiler model.
The original tyre compressor is not present.
Seats are provisionally sold.
Rubber covers will be required on my own car.


Top
 Profile  
Reply with quote  
 Post subject: Re: Breaking 944 S2
PostPosted: Mon Nov 04, 2013 7:53 pm 
Offline

Joined: Tue Nov 13, 2007 4:22 pm
Posts: 92
Yes, the screws and cup washers which hold the speaker panel on, underneath the side window. How much would they be and both B post vinyls (if they are perfect)
Thanks Neal


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 48 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group