Cam housing gasket
Moderator: Moderators
-
pauly
- Posts: 1892
- Joined: Sun Feb 24, 2008 7:16 pm
- TIPEC membership: 0
- Location: UK
Cam housing gasket
I'm about to replace the gasket between the cam housing and head. AFAIK Porsche fits this dry, debating whether to add a smear of sealant at the front where it's prone to leaking?
-
scam75
- Posts: 1244
- Joined: Wed Aug 19, 2009 1:44 pm
- TIPEC membership: 0
- Location: Glasgow
Re: Cam housing gasket
Can't advise Pauly but keen to know as every one of mine has leaked at the front over the years (3 from memory) and mine will be getting done again soon when my engine goes back together.
Stuart
Stuart
'90 944 Turbo - Sunroof delete, Factory bridge spoiler, CS wheels, CS steering wheel, 1st MY90 turbo in UK
Promax L2 chips, SciVision MAF, Lindsey DPW, MBC, Forge recirc valve, 3 bar FPR, K&N panel, GAZ Gold, wideband AFR, Sytec Motorsport Fuel Pump.
Promax L2 chips, SciVision MAF, Lindsey DPW, MBC, Forge recirc valve, 3 bar FPR, K&N panel, GAZ Gold, wideband AFR, Sytec Motorsport Fuel Pump.
-
pauly
- Posts: 1892
- Joined: Sun Feb 24, 2008 7:16 pm
- TIPEC membership: 0
- Location: UK
Re: Cam housing gasket
Reckon some sealant it is then. Mines had a small leak for years, onto number 1 header and the undertrays.
-
scam75
- Posts: 1244
- Joined: Wed Aug 19, 2009 1:44 pm
- TIPEC membership: 0
- Location: Glasgow
Re: Cam housing gasket
Yeah, always around number 1.pauly wrote:Reckon some sealant it is then. Mines had a small leak for years, onto number 1 header and the undertrays.
'90 944 Turbo - Sunroof delete, Factory bridge spoiler, CS wheels, CS steering wheel, 1st MY90 turbo in UK
Promax L2 chips, SciVision MAF, Lindsey DPW, MBC, Forge recirc valve, 3 bar FPR, K&N panel, GAZ Gold, wideband AFR, Sytec Motorsport Fuel Pump.
Promax L2 chips, SciVision MAF, Lindsey DPW, MBC, Forge recirc valve, 3 bar FPR, K&N panel, GAZ Gold, wideband AFR, Sytec Motorsport Fuel Pump.