Page 1 of 1
996 track rod end bush ???
Posted: Wed Jun 06, 2018 9:44 am
by IanM123
Guys, i know I'm being think. In the picture is the bush or sleeve part of the track rod or separate ? I can't easily seem to get it off !!any tips on how to get it off ?? Heat will obvioulst trash the thing and it only needs a new rubber cover.
- trackrod.png (191.55 KiB) Viewed 8200 times
Ta 996 C4 1999
Re: 996 track rod end bush ???
Posted: Wed Jun 06, 2018 10:34 am
by Waylander
the joint is an integral part of the arm, only the boot might be replaceable
a new arm is the only real option 996 347 131 04 £78.25 inc vat
Re: 996 track rod end bush ???
Posted: Wed Jun 06, 2018 10:54 am
by IanM123
Thanks I will check out the part number. I'm worried about the "top hat" shaped bit...is it part of the arm or a bush out of the hub ? I will need to get it off to fit a new track rod end. No pictures ever show the "top hat"..except my picture of a used one ? It looks like the track rod is a standard tapered shaft..and this bush is separate ?? can't budge theh damn thing though !!! Cheers
Re: 996 track rod end bush ???
Posted: Wed Jun 06, 2018 1:23 pm
by Waylander
I do have to agree with you, looking at PET there is no big fat rubber bit, looking at the pictures of the spindle/Hub assembley i cannot see that bit on there either.
Re: 996 track rod end bush ???
Posted: Wed Jun 06, 2018 7:51 pm
by IanM123
Its steel and I am guessing it's not meant to come out of the hub assembly. I assume it "strengthens" the alloy of the steering arm but its a tough bit to get off the track rod end...I will soak overnight and have another go. Cheers
Re: 996 track rod end bush ???
Posted: Wed Jun 06, 2018 11:08 pm
by Waylander
Still can’t see it as a spare part, which means to me it’s not supposed to come out