What did you do to your 924/944/968 today?

[scam75]

Fitted a genuine Porsche stainless steel back box, got it for a bargain and still had the part number stickers on! Looks and sounds nicer than the mild steel replacement back box that was previously on, think it goes better too but that maybe placebo effect!

Stuart

[andycowman]

Over the weekend I cleaned the inside up and emptied all the rubbish (amazing how much junk was in there since the car has helped on three house moves in the last 3 years!!)

I then started on my drivers side sill - they were all welded up (inner and outer) for the MOT and are solid now but were not pretty. So I had a go at using a bit of filler to get the shape back and then primed with rust proofing primer and painted red (audi brilliant red which matches the guards red on my car perfectly!) with clear coat on top. next a layer of stone chip protection and then I can fit the plastic sill bits below before starting on the other side.

looks better than before, still not perfect but will do on each side until I eventually send her to a body shop for lots of little bits and bobs.

[t3rra]

Shut the rear hacth with my keys inside, lucky the turbo has central locking and the hacth unlocks the doors!

[kongsodoken]

I did nothing but my local indi......fitted

New Radiator
New air con radiator
OEM front arb bushes,drop link bushes
ARB triangulation brackets
shinney new brake bleed nipples and caps
968 camber,caster block things (whatever they are called)
4 wheel alignment

Pick it up tomorrow

[frenchy]

Swapped the cars over, that is brought the 220 from the other garage and gave it a wash and dry, starting to get her ready for LM Classic next week

[t3rra]

Did a wash/clay bar /polish and wax. Didn't get round 2 cleaning the wheels.

Will stick some pics up once I'm at a pc.

[Althejazzman]

Gleaming!

[jameso]

Sorted out the intake setup.

[simkin911]

Did a wash/clay bar /polish and wax. Didn't get round 2 cleaning the wheels.

Will stick some pics up once I'm at a pc.

Not sure if some would consider it a 'no, no' but looks great in those photos but I wondered about a turbo wing decal ? Could look great against that colour.

[t3rra]

I have been toying with the idea, but deff needs 2 be the faded out type and not soilded. Are you thinking black? With black wheels work work well. Also maybe a colour thats close 2 the paint, but a lighter or darker shade. I think it's one off them things that u put on and the change looks better, you remove and the change looks better lol.

Iv always like the clubsport CS wing ones as well. but always thought the line after the s should fade out as it brake in 2 clubsport text

[Carrera RSR]

Iv always like the clubsport CS wing ones as well. but always thought the line after the s should fade out as it brake in 2 clubsport text

The OEM Porsche decals are NLA, and all the aftermarket ones are solid coloured vinyl. Anyone know a source for the OEM look?

Either 911 front wing


Or 944 front wing option (but shown on 911 CS prototype)

[kongsodoken]

Did a wash/clay bar /polish and wax. Didn't get round 2 cleaning the wheels.

Will stick some pics up once I'm at a pc.

Looks very smart but please do not put a CS decal on a turbo No matter how good it looks!

[t3rra]

Don't worry, cs is really 4 a striped out track based race car

[Mad Englishman]

Kissed the bonnet and said thank you when i started the car after bottom end change and all works great. Phew I can without a doubt say I would not have been a happy bunny if it did not.

[t3rra]

glad 2 hear your up and running again.