Porsche Enthusiasts Club Forum

Works for me

Steve, you should really keep that car covered up until 21:00 with those Fuchs.

I like the Turbo wheels but the Fuchs have it

...Finally had the the day I've been waiting for ....I put more back on the car than I took off

The doors have been stripped, electro primmed and painted allso have the inside of the doors sprayed with sound deadening paint .....do not if it will work

got the door handles back from the powdercoater ...did them in Matt Black, allso cleaned up the window regulators, latches and everything else that goes inside the door

Fitted new glass, glazing seals upper & lower.....and 968 style door seals I think they look better than the 944 version

I decided that I wanted a Matt effect on the B-post between the rear window seal and door seal so I have wraped the B-post in matt black vinyl

1 door done 1to go

Started a rebuild project with a spare turbo engine. Sent the ally bits off for aqua blasting and the nuts and bolts for replating. Engine has been stripped down and is currently in the process of chemical cleaning prior to some lightening, balancing, porting and polishing.

Very nice

this is my next project, but I want to do it without removing the engine, who did the plating and how much did you pay?

kongsodoken wrote:Fitted new glass, glazing seals upper & lower.....and 968 style door seals I think they look better than the 944 version

I decided that I wanted a Matt effect on the B-post between the rear window seal and door seal so I have wraped the B-post in matt black vinyl

1 door done 1to go

Its going to be drafty without the rear window .... no really that looks great, keep up the work

kongsodoken wrote:Very nice

this is my next project, but I want to do it without removing the engine, who did the plating and how much did you pay?

£30 for the tub full at a local plating firm in Weston. Now need to unthread all the individual nuts, bolts and all the washers from the copper wire!

£30 bargain.......I would be worried about getting them all back on the car.....I allways seem so have some left over

thinking of buying this so I can take one out...put one in

http://www.eagleday.com/yezifa.html


.......Also thinking of using NAPA (thermoplastic) hose clamps?

looking really good......february is looming.........

It's my Birthday

Look what my wife got me

Happy Birthday, nice pressie by the way

Happy B-Day

Is it a fury birthday cake?

Carrera RSR wrote:Started a rebuild project with a spare turbo engine. Sent the ally bits off for aqua blasting and the nuts and bolts for replating. Engine has been stripped down and is currently in the process of chemical cleaning prior to some lightening, balancing, porting and polishing.

You're going to be so proud of that once it's done. I wish I had a wee bit of your patience.

It was my birthday sunday but I bought these myself.