Parts clearout - You tell us what you want and make an offer

PaulSmith · **Posted:** Wed Feb 13, 2013 7:52 pm

The seat belt buckles arrived today and are just what I need for my track seats.

Thanks again Jon and I hope the move goes well

jmgarage · **Posted:** Thu Feb 14, 2013 2:08 pm

No problem Paul,

Many apologies to anyone who has been waiting for parts, if your parts have not been sent out yet, they will by the end of the day.

We have had a bit of an tidal wave of enquiries and parts being sent out.

For a fast track for parts enquiries, either new or for used parts, call Jamie on 01202 488800

You can also post in here what parts you may need

jabriel · **Posted:** Sat Feb 16, 2013 4:55 pm

Hi Jon, I'm looking for the following parts. Some are most likely not available but I have to ask just in case...

If you can let me know what you have available, I'm make an offer on those. All parts for a back '91 944t.

Linen door cards

Luggage blind in good working order

Black sunroof (electrical)

Bonnet with vents (as per you article/comments in a thread re where the best place is for the vents to be on a 944t)

alloy wheel centre caps (plastic or metal)

17" Fuchs (long shot, I know)

Ruf wheels (any, up to 18".)

17" split rim (bbs style)

Heated wing mirrors (left and right hand side needed)

Black wing mirrors

Black 968 wing mirrors with base

Sports seats, preferably electric. (I think some have even fit sports seats from a boxster into a 944 so am flexible if we can make something work.) Or...

Bucket seats

Struts for front bonnet.

Vitesse MAF kit

9XX Hybrid ball bearing Turbo

9XX Intercooler

9XX Pro Wastegate

9XX Fuel pump

Greddy Profec electronic boost controller

Air box housing with bolts etc.

Heat shield (which can be seen under the drivers side of the car. Sorry I can't be more specific.)

Black or linen boot carpet (Must be in good condition)

Resistor pack (fan position 1-3 not working)

(Eta air box, heat shield, boot carpet, resistor pack)

sirion · **Posted:** Sun Feb 17, 2013 8:57 am

jmgarage wrote:

sirion wrote:

For a set of Genuine set of 17" Cup-2 wheels in 7.5J and 9J (968 sizes), as much as I want to accept offers in here, I think the offer is a bit too low to accept.

However, in the spirit of the thread, I want to make sure everyone feels they have had a bit of a bargain, so I have an idea...

I will start a thread in the 924/944/968 area and poll the membership as to what they think a set of these wheels are worth. I will also tomorrow post up some pictures of the wheels... this way we can get a feel for what they are worth, and then, I will let you have them for an amount that seems reasonable but still a good bargain price.. Hows that sound?

Hi Jon,

As you suggested I followed the thread re values and waited for the photos to be posted. I also sent you my email via pm in case you wanted to send photos directly to me, but no reply again. Obviously without knowing the condition I cannot know what is a reasonable amount to increase my offer by :roll:

. Am I to assume that as the value thread has gone dead and I have had no reply to my pms that these are no
longer available?

jmgarage · **Posted:** Mon Feb 18, 2013 1:25 am

Jabriel, I will take a look at your list in the morning and email what we have.

jmgarage · **Posted:** Mon Feb 18, 2013 1:32 am

sirion wrote:

I have had no reply to my pms that these are no longer available?

Sorry I have not answered this one, been doing rather a lot of soul searching... I think I have come to the conclusion that I would probably want more for the wheels than the current market would pay for them.

At less than £750 for the CUP-1's and less than £600 for the CUP-2's I would probably keep them. If this is in your budget for what you are happy to spend, let me know and I will post some photos of the wheels.

jabriel · **Posted:** Mon Feb 18, 2013 7:42 am

Thanks Jon.

jmgarage wrote:

Jabriel, I will take a look at your list in the morning and email what we have.

sirion · **Posted:** Mon Feb 18, 2013 9:17 am

jmgarage wrote:

Sorry I have not answered this one, been doing rather a lot of soul searching... I think I have come to the conclusion that I would probably want more for the wheels than the current market would pay for them.At less than £750 for the CUP-1's and less than £600 for the CUP-2's I would probably keep them. If this is in your budget for what you are happy to spend, let me know and I will post some photos of the wheels.

I can now see why I did not get a reply. As you had already said you would let them go for 'around £450' and mindful of the consensus regarding current values I'm sure you will understand if I don't jump at the chance to pay £600. But.... no hard feelings. If I was selling, I too would want the best price I could get. As the weather improves you may get what you are after.

jmgarage · **Posted:** Mon Feb 18, 2013 10:06 am

The cup-2's I am less attached to, the cup-1's have always been my favourite wheels.

I will dig out my cup-2's and see how many sets I have, and if previously I said I would let them go for £450 then I will let one set go for this amount.

I will post some photos here later.

ALZ1933 · **Posted:** Wed Feb 20, 2013 8:45 am

Hi Jon,

Would you have a good condition window rubber guide for a drivers door?
Porsche part No : 944 537 080 00

Say £30 ???

Mine has a slight tear in the rubber & my cars being painted soon so I'd like to replace it when its off.

Regards,

Alan.

dirty hands · **Posted:** Wed Feb 20, 2013 9:56 pm

hi jon, i would still like the 1/4 panel cards as per my original posting...when your ready though!!!

jmgarage · **Posted:** Fri Feb 22, 2013 2:56 pm

ALZ1933 wrote:

Would you have a good condition window rubber guide for a drivers door?
Porsche part No : 944 537 080 00
Say £30 ???

We can accept that offer, collected or plus shipping

We have one off the car and ready to be posted, call Jamie on 01202 488800 to arrange.

jmgarage · **Posted:** Fri Feb 22, 2013 3:51 pm

dirty hands wrote:

hi jon, i would still like the 1/4 panel cards as per my original posting...when your ready though!!!

We are still sorting through the container of interior trims, I know I have one side, but I want to make sure we have good ones on the other side.

mjs019 · **Posted:** Fri Feb 22, 2013 10:56 pm

Hi Jon,

Near side mirror for an S2 in red? £10

Mick Simmons

rav · **Posted:** Sat Feb 23, 2013 9:13 am

Thanks for the headlight connector Jon.
It will enable my freind to drive his A reg Marashino 2.5 Lux again.

Good luck with the move and I am sure that the others will join me to thank you for all your help and advise on this forum.

Porsche Enthusiasts Club Forum

Parts clearout - You tell us what you want and make an offer

Who is online