Porsche Enthusiasts Club Forum

It is currently Sun Jun 22, 2025 2:52 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Wanted S2/Turbo under wing plastic moulding and boot blind
PostPosted: Mon Nov 19, 2012 2:36 pm 
Offline

Joined: Mon Sep 17, 2012 7:24 pm
Posts: 136
Location: Dreary East Yorkshire for now.
TIPEC membership: 0
Hi guys,

I'm after the following bits, I keep missing them on ebay or they end up being grotty when you ask questions.

I need a drivers side (os) front wing under moulding, this is the part which meets the sill moulding it's a little curved bit of plastic that has in my case dropped off due to a bodging previous owner. It's the part actually under the sill/wing not the rubbing strip along the door/wings. I only need the front wing bit, don't care if it's got missing mounts etc. I would take a full set if you don't want to split.

I also need a luggage/boot blind, colour flexible as long as it isn't blue or brown, ideally I'd like black, but burgundy would be fine, I'm after the one piece seat type not the baggy cloth 2 piece type. I would like the end caps to be in decent condition at least on the spring end.

I also need an S2/Turbo badge panel/nose panel in undented decent condition.

All parts will need posting to East Yorkshire.

Many thanks!

_________________
Current toys:
944S2 Zyclamen Pearl Magazine featured.
Audi Quattro 20v Winter car
MGCGT University motors special
MGB LE run out Californian import
1966 MGBGT 3 synchro
1976 Midget Oselli engine.


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Mon Nov 19, 2012 3:02 pm 
Offline

Joined: Sun Jan 24, 2010 12:07 am
Posts: 2381
TIPEC membership: 0
Sold the rear roller blind, 2 another member. But you can get new sides from Opc about £7 MIT be easyer find one that needs them and put new ones on.

Iv still got the under sills and badge pannle.

_________________
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Mon Nov 19, 2012 3:51 pm 
Offline

Joined: Sat Aug 27, 2011 4:41 pm
Posts: 360
ive got a black luggage blind close to mint.
£35 delivered sound fair??

_________________
82' lightweight 944/968 engine lhasa green


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Mon Nov 19, 2012 5:11 pm 
Offline

Joined: Mon Sep 17, 2012 7:24 pm
Posts: 136
Location: Dreary East Yorkshire for now.
TIPEC membership: 0
Sounds fair to me, can you just check the ends for me, as long as they aren't cracked badly or previously cracked and badly repaired, also as long as the blind pulls out and the hooks are intact I'll take it!

All I will say is I've posted a few of these over the years and they need loads of packing around the ends, that plastic is so brittle.

Terra I'll take those with pleasure I was just waiting for a reply from you about them last time, how much do you want for them posted?

Oliver

_________________
Current toys:
944S2 Zyclamen Pearl Magazine featured.
Audi Quattro 20v Winter car
MGCGT University motors special
MGB LE run out Californian import
1966 MGBGT 3 synchro
1976 Midget Oselli engine.


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Mon Nov 19, 2012 6:31 pm 
Offline

Joined: Sun Jan 24, 2010 12:07 am
Posts: 2381
TIPEC membership: 0
Really? Sorry I was waiting a reply from you. Thought u had gone quite.

_________________
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Tue Nov 20, 2012 12:32 am 
Offline

Joined: Sat Aug 27, 2011 4:41 pm
Posts: 360
ill post a pic or two tomorrow for you, will be very well packaged.

_________________
82' lightweight 944/968 engine lhasa green


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Tue Nov 20, 2012 12:48 am 
Offline

Joined: Sat Aug 27, 2011 4:41 pm
Posts: 360
the blind pulls and retracts correctly, the hooks are intact and the blind material is excellent but unfortunately the plastic end cases have chipped a bit, not broken but not perfect. let me know if you still want it.

_________________
82' lightweight 944/968 engine lhasa green


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Tue Nov 20, 2012 10:57 am 
Offline

Joined: Mon Sep 17, 2012 7:24 pm
Posts: 136
Location: Dreary East Yorkshire for now.
TIPEC membership: 0
As long as they don't affect the integrity of them they will be fine.

Paypal/Bank transfer?

_________________
Current toys:
944S2 Zyclamen Pearl Magazine featured.
Audi Quattro 20v Winter car
MGCGT University motors special
MGB LE run out Californian import
1966 MGBGT 3 synchro
1976 Midget Oselli engine.


Top
 Profile  
Reply with quote  
 Post subject: Re: Wanted S2/Turbo under wing plastic moulding and boot bli
PostPosted: Tue Nov 20, 2012 11:46 am 
Offline

Joined: Fri Nov 05, 2010 10:55 pm
Posts: 1138
TIPEC membership: 6926
t3rra wrote:
. But you can get new sides from Opc about £7 .

.


just emailed OPC they have quote £100.01 each side for the front bits and £82 each side for the rears :(


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group