968 boss to fit 944S2

Adrian30 · **Joined:** Wed Apr 09, 2008 2:46 pm **Posts:** 11

Does anyone have any advice or know of a spare boss? i have the 968 wheel but the seller decided not to disclose it cam withou a boss. The wheel is 3 spoke and has three mounting holes. Have looked for boss tofit, but no luck. Can anone help?

J.J. · **Posted:** Thu Apr 10, 2008 4:55 pm

Hi Adrian. A picture is worth a thousand words! Not sure what you mean :?:

Adrian30 · **Joined:** Wed Apr 09, 2008 2:46 pm **Posts:** 11

Wish I could put a picture on for what I need but then that would mean I have the bit i need?Its the steering wheel boss to which the wheel screws (ie 3 screws only) and then the wheel and boss assembly is bolted to the steering shaft.

tr7v8 · **Posted:** Thu Apr 10, 2008 5:13 pm

Is this a Porsche wheel or another aftermarket wheel?

Adrian30 · **Joined:** Wed Apr 09, 2008 2:46 pm **Posts:** 11

Its a genuine Porsche 968 CS wheel, which i think is the problem as there are only 3 mounting holes so I think the most likely solution is a 968 boss;trouble is Porsche only supply the boss AND wheel together.

thegumeister · **Posted:** Thu Apr 10, 2008 8:57 pm

Its the wiggly boss that sits behind the CS wheel, I am fitting a 75mm extension with longer bolts this W/End so I will take pictures for you

Adrian30 · **Joined:** Wed Apr 09, 2008 2:46 pm **Posts:** 11

Thanks. That will give me a starting point. At least with it being wet I am not tempted to take mine out for a blast.....but there again, who can resist it!

thegumeister · **Posted:** Fri Apr 11, 2008 4:17 pm

Here we go

lindsayhbrown · **Posted:** Fri Apr 11, 2008 4:19 pm

so you are the boss then

thegumeister · **Posted:** Fri Apr 11, 2008 4:21 pm

And again

thegumeister · **Posted:** Fri Apr 11, 2008 4:23 pm

And Again

thegumeister · **Posted:** Fri Apr 11, 2008 4:42 pm

Last 1

ExAudiSi · **Posted:** Fri Apr 11, 2008 6:55 pm

I didn't realise that came off seperately :shock:

Mind you, I wasn't looking for it to come off as I was replacing the air bag wheel with it!

Adrian30 · **Joined:** Wed Apr 09, 2008 2:46 pm **Posts:** 11

Thanks ever so much for the pics, gives me something to work with. I don't suppose anyone has a spare boss like this?

Ben944S2Cab · **Posted:** Sat Apr 12, 2008 6:42 pm

Looks like a standard momo boss with only 3 holes tapped in it. Either you could use a momo one and only use 3 screws if they are the same, or you may have to get them tapped up a couple of sizes. Take it to halfords and get them to show you any momo boss for any car w/o airbag and see if the holes line up. where abouts are you on the country?

Porsche Enthusiasts Club Forum

968 boss to fit 944S2

Who is online