my brake pad warning light came on and as i often overheat the pads i have just replaced the old ones with ebc green's, ( with no wear indicators) the warning light is still on. is there a way to reset the indicator.
thanks
brake pad warning light
Moderator: Moderators
-
rapidstu
- Posts: 560
- Joined: Wed Jun 10, 2009 7:46 pm
- TIPEC membership: 5385
- Location: bedfordshire
- Contact:
brake pad warning light
[ stuart
944s2
944 convertable
TR7
TVR 300m[sold
MGB rusted away
Z1000
GSX 1100r/i]
star gemini 250 (kart)
sisley cobra 100 (kart)
http://stuarthusband.com
944s2
944 convertable
TR7
TVR 300m[sold
MGB rusted away
Z1000
GSX 1100r/i]
star gemini 250 (kart)
sisley cobra 100 (kart)
http://stuarthusband.com
-
flt505
- Posts: 807
- Joined: Mon Jan 02, 2012 2:58 pm
- TIPEC membership: 0
- Location: cape town SA
Re: brake pad warning light
Doesn't the warning light work on an earthing ie when the sensor earths with the disc the warning light comes on? or am I not understanding your problem/situation?
Dave
Dave
-
dawthan
- Posts: 74
- Joined: Tue May 06, 2008 3:53 pm
- TIPEC membership: 0
- Location: Park Springs Barnsley
- Contact:
Re: brake pad warning light
have you put a wear indicator on each axle and tied them up or have you just left the plug empty on the hub if so then that is why you have light on as it needs to make a circuit and whilst disconnected is an open circuit
Independent Porsche service centre
All aspects of Porsche servicing and repairs carried out, discounts for tipec members
All aspects of Porsche servicing and repairs carried out, discounts for tipec members