Well After finally finding a Union nut very kindly supplied by Paul Thorn off the list - Many Thanks - I fitted my new union nut & seal to the Auto oil pan and tightened everything up & re-filled the auto box. Everything runs as sweet as a nut and no leaks - but my gearbox doesn't kick down still!
To refresh, the symptoms are; as I drive from start the gearbox will change up normally. If I want to go faster and drop a gear by the kick-down {not double kick-down via the relay] then as I apply the gas peddle some more the revs go up but where it would normally kick-down a gear you just feel a slight hint of an action but nothing happens. I can move the stick shift and drop it into any gear so the gearbox works in that regard. But there is no kick-down form pushing the accelerator further to the floor, just a faint hint that something is trying!
The auto gearbox was working perfectly with full kick-down some 2 months ago and it just disappeared on me whist driving to a tipec garage day
I have changed the filter for new and put new ATF oil in the gearbox
Might the Beldon cable be broken? I have tried it but it seems to still be attached
I have some vacuum @ the 7 way connector but it does seem to drop
Anything obvious I am missing here?
Help needed from the list
Thanks in advance
Steve