924, 944 and 968 discussion area
Moderator: Moderators
chrisygeezer
Posts: 28 Joined: Tue Jan 24, 2012 1:25 pm
TIPEC membership: 6538
Post
by chrisygeezer » Tue Jan 24, 2012 1:40 pm
All
I am new to this site so am not sure if this post is in the correct area !!. I am looking for a Drivers side 1990 944 S2 fog light lens. This is not the main lense but the small inside panel about 3 inch high x 1inch wide. I beleive they call this the "Fog light trim". Below is a site advertising the parts (no.2) in the U.S but at $70 + it hurts me
http://www.lindseyracing.com/LR/Parts/944LIGHT.html Anybody breaking a car with this part spare ?
Any help would be apprciated.
Thanks
Chris Adams
1990 944 S2
hotblack944
Site Admin
Posts: 1119 Joined: Sun Nov 04, 2007 1:48 pm
TIPEC membership: 4746
Location: Wimborne, Dorset
Contact:
Post
by hotblack944 » Tue Jan 24, 2012 1:43 pm
Hi Chris, I've got a spare set but they're mostly damaged. I'll check the state of them when I get home. I take it your car is RHD? Jim. PS Welcome to the forums!
Jim Tarrant
ARO Southern
Website & Forum Admin
1991 944 S2 black/grey
1986 944 Lux red/black
JOIN THE CLUB
chrisygeezer
Posts: 28 Joined: Tue Jan 24, 2012 1:25 pm
TIPEC membership: 6538
Post
by chrisygeezer » Tue Jan 24, 2012 1:47 pm
Hi Jim Yeah 1990 944 S2 standard RHD. Got one from a chap previously but I think it may have been from turbo as it didnt fit. Would appriciate it if you can check and let me know. Thanks Chris
1990 944 S2
Hitman Hack
Posts: 164 Joined: Thu Mar 04, 2010 1:29 pm
TIPEC membership: 6015
Skype ID: umgi_hackn
Location: Harrow
Post
by Hitman Hack » Tue Jan 24, 2012 3:27 pm
When you find a replacement part you should get some fog light protectors. They are easily locatable on ebay and are developed by a TIPEC member. Easy to fit and barely visible so well worth the £20 expenditure.
chrisygeezer
Posts: 28 Joined: Tue Jan 24, 2012 1:25 pm
TIPEC membership: 6538
Post
by chrisygeezer » Tue Jan 24, 2012 3:30 pm
Cheers for the advise... Will invest once I have a replacement Trim
1990 944 S2
A9XXC
Posts: 308 Joined: Thu Sep 17, 2009 8:45 pm
TIPEC membership: 0
Location: Leicester
Contact:
Post
by A9XXC » Tue Jan 24, 2012 6:45 pm
Turbo and S2 trims should be the same- and LHD / RHD. Never had either but the part nos are the same.
Mike
1989 S2 Velvet Red Working clock No air-con
1989 2.7 Alpine White Working clock non-working aircon SOLD
1985 2.5 Alpine White basic! SOLD
sulzeruk
Posts: 400 Joined: Thu Oct 15, 2009 11:24 am
TIPEC membership: 5529
Post
by sulzeruk » Tue Jan 24, 2012 7:11 pm
Trims are the same between models but all 4 are different due to being handed. I have a couple of sets here if you need one. Alasdair
chrisygeezer
Posts: 28 Joined: Tue Jan 24, 2012 1:25 pm
TIPEC membership: 6538
Post
by chrisygeezer » Tue Jan 24, 2012 8:05 pm
Can you send me some pics of the front nd back of the trim. I should be able to confirm if it's correct. Cheers for your help Chris
1990 944 S2
chrisygeezer
Posts: 28 Joined: Tue Jan 24, 2012 1:25 pm
TIPEC membership: 6538
Post
by chrisygeezer » Tue Jan 24, 2012 8:53 pm
Hi Alasdair The part number is a little faded but I think it is 1301099047 (L). I need the right lens. The back of the trim seems to be flat. I will try and send you a pic of my left trim
1990 944 S2
hotblack944
Site Admin
Posts: 1119 Joined: Sun Nov 04, 2007 1:48 pm
TIPEC membership: 4746
Location: Wimborne, Dorset
Contact:
Post
by hotblack944 » Tue Jan 24, 2012 10:04 pm
I have this one intact:
If that's the one you need, PM me your address and I'll put it in the post. (Part number is 1301099048R for reference.)
Jim.
Jim Tarrant
ARO Southern
Website & Forum Admin
1991 944 S2 black/grey
1986 944 Lux red/black
JOIN THE CLUB
chrisygeezer
Posts: 28 Joined: Tue Jan 24, 2012 1:25 pm
TIPEC membership: 6538
Post
by chrisygeezer » Wed Jan 25, 2012 7:54 am
Hi Jim Yes that the exact part. Not sure if I can PM yet as I am a new memeber but if you send me your e-mail address I will e-mail you my address. Let me know what you want for the part and postage etc. Your a legend. Chris
1990 944 S2
sam
Posts: 4904 Joined: Mon Nov 12, 2007 12:16 am
TIPEC membership: 993
Location: Emsworth Hants
Post
by sam » Wed Jan 25, 2012 8:04 am
Your a legend.
He knows!