Hi all
I have done some searching and google action but still can not get these to work.... the problem is my indicators, when signalling they do nothing. They dont even put the little light on solidly.
The hazards all work perfectly, with the ignition off and key out the parking lights work perfectly aswell. I have looked at the relay and put a new one in. Still nothing. Checked the fuses and nothing, tried looking at the switch wires and cant see anything amiss! Any other thoughts?
Any one know which wires under the fuse box are for the indicators?
I cant go for an MOT until they are working!!
Thanks
Andy
944 Turbo - indicator issue
Moderator: Moderators
-
andycowman
- Posts: 507
- Joined: Tue Nov 24, 2009 11:25 am
- TIPEC membership: 0
-
andycowman
- Posts: 507
- Joined: Tue Nov 24, 2009 11:25 am
- TIPEC membership: 0
Re: 944 Turbo - indicator issue
Finally got a change to have a good look and got them running.
pin 49a from the hazard switch had power but between there and pin 49a on the indicator switch itself there is a break somewhere. A new section of cable and everything is working perfectly.
pin 49a from the hazard switch had power but between there and pin 49a on the indicator switch itself there is a break somewhere. A new section of cable and everything is working perfectly.