Porsche Enthusiasts Club Forum

Also known as Turbo Twist or Boxster S alloys , front wheels are 7J Et 55 shod with 205/50/17 tyres with 3-4mm of tread in the centre but are worn on the inside edge so would probably need to be replaced for road use but may be ok for a track day or two . Rears are 8.5j Et 50 with all most new 255/40/17 tyres which have 7mm of even tread remaining . No splits , buckling , kerbing , scratches or chunks missing but they do have some corrosion and flaking paint (worse on the inside of the alloys) so would benefit from either a partial or full sand down and respray . I'm tempted to do this myself but I'm currently busy on another project although i might change my mind if i find the time . In the meantime they are up for sale at £250 . Any further questions please feel free to ask .

Here's a couple of photos of the wheels on my car


There is some corrosion around the valve on this wheel but the other marks on the alloy and tyre are just dirt .