rear lights seal

amyzoe · **Posted:** Thu Mar 24, 2011 8:04 pm

Hi to everyone, recently bought a 944 s2 and just going through my to do list.The first was to seal rear lights,thought about silicone but remembered i had some foam sealer that comes with a s/s sink and is in a roll.Worked a treat all tested and put back,and easily removed when needed.
Thanks for all the good advise and tips on here.Hope this one helps someone out.

Lee 944 · **Posted:** Thu Mar 24, 2011 8:14 pm

Hi and welcome :hello2:

I need to do this, as I'm putting another set of rear light on mine, so I might try it.

Then I'll post those lights to you Rob, :oops:

kongsodoken · **Posted:** Thu Mar 24, 2011 8:54 pm

HI
are we going to see some pictures???? :bounce:

madrob6 · **Posted:** Mon Mar 28, 2011 9:40 am

Lee 944 wrote:

Then I'll post those lights to you Rob, :oops:

Who knows, my car might have an engine in it when you get around to posting them

Carrera RSR · **Posted:** Mon Mar 28, 2011 6:45 pm

Did mine a week ago with neoprene rubber foam strip, 10mm x 6mm thick. Works a treat and the light can be removed with no hassles, unlike silicone sealant.

moeman79 · **Posted:** Mon Feb 01, 2016 8:30 pm

Hey Carrera RSR, it's been a few years since you used the neoprene strips to seal the rear lights. Can I ask how they've held up?

Porsche Enthusiasts Club Forum

rear lights seal

Who is online