Wanted: 944 Top Mount Spacer Sleeve

Sell, Swap and ask for Parts here. Traders and Breakers posts will be deleted.

Moderator: Moderators

Post Reply
User avatar
Prophead
Posts: 574
Joined: Fri Jun 12, 2015 5:02 pm
TIPEC membership: 7406

Wanted: 944 Top Mount Spacer Sleeve

Post by Prophead »

I find myself the unfortunate victim of goodwill and as such my top mounts and their spacer sleeves have suffered catastrophic failure. I've mange to replace the Top mounts but unfortunately the spacer sleeves part no:- 823 412 365 are a discontinued part and no longer available. Before I go to the lengths of getting some machined Thought I'd check if anyone has some laying around, perhaps you have added camber adjustable top mounts and just happen to have kept these bits.

These are the little sleeves that sit in the bearings in the top mounts.
924 1981 GTv8 Bonkers V8 conversion trackday car.
https://www.facebook.com/theleatherbuff
https://www.theleatherbuff.co.uk/
sgl1966
Posts: 533
Joined: Wed Apr 18, 2012 8:26 am
TIPEC membership: 0

Re: Wanted: 944 Top Mount Spacer Sleeve

Post by sgl1966 »

I believe I have some early 944 mounts in the garage, not sure what parts you are after but are welcome to the mounts if that is what you are after.
Simon
User avatar
Prophead
Posts: 574
Joined: Fri Jun 12, 2015 5:02 pm
TIPEC membership: 7406

Re: Wanted: 944 Top Mount Spacer Sleeve

Post by Prophead »

sgl1966 wrote:I believe I have some early 944 mounts in the garage, not sure what parts you are after but are welcome to the mounts if that is what you are after.
Simon
thanks for the reply. I might have found what I am looking for, should turn up tomorrow. If they fit then I am good, if not I will post some pics of what I am after.
924 1981 GTv8 Bonkers V8 conversion trackday car.
https://www.facebook.com/theleatherbuff
https://www.theleatherbuff.co.uk/
Post Reply