Porsche Enthusiasts Club Forum

i have a massive leak from my 944 cab, looks to be coming from the seals where the oil cooler pipes clamp onto the oil cooler housing, i have a kit of seals for the later 944 and 968 but these two seals are not in it, BUT there are 2 ally washers that look like they will go over the ends of the pipe and compress when the pipes are refitted and clamped up.
is this correct ?? or do i need to try and source the seals seperately.
thanks stuart

I think they're shims for setting the housing up on an early car with internal cooler.

There are 4 O Rings on the oil cooler pipes and no shims shown in PET

I replaced mine when I had the oil filter housing off, as that was puking oil all over the place