How do you remove the windscreen pillar plastic trim?

LilMsPiggy · **Posted:** Sun May 03, 2015 5:29 pm

Changing the headlining on my 88 944s and need to remove the plastic windscreen pillar trim, removed three blanking plugs, middle and bottom one phillips screws but not in the top one.
Help, what is holding the top one, no screw there but it won 't come off!

And I thought the hardest part would be removing the Quarter windows, that was straight forward. :roll:

Thanks
Ian.

JasonGibson · **Posted:** Sun May 03, 2015 6:02 pm

Very likely that there is a screw at the top. The trim has moved on top of it.

Had The same on mine and screw was rusty

ALZ1933 · **Posted:** Sun May 03, 2015 6:59 pm

Like wise, I has the same problem. Screws were rusty and were not in the centre of the holes where the caps had come from. Took a bit of feeling around with the screwdriver and a difficult peek with a torch.

LilMsPiggy · **Posted:** Sun May 03, 2015 7:30 pm

Thanks, will have a closer look for the screw with a torch tomorrow.

LilMsPiggy · **Posted:** Mon May 04, 2015 6:51 pm

Result, found the screw way off centre to the hole (not rusty though) in fact they could not be seen with a torch, same on both sides, anyway trims now off

Thanks again guys
Ian.

Porsche Enthusiasts Club Forum

How do you remove the windscreen pillar plastic trim?

Who is online