Porsche Enthusiasts Club Forum

been collecting parts to build a turbo engine, but no longer needed as I have something in the pipeline
perfect for someone wanting to convert a lux to turbo. all the parts are bolt on, all you need to do is put turbo pistons in your lux block

certainly cheaper than buying a good turbo these days but all the performance

944 turbo 86 gearbox non lsd £350
s2 gearbox for faster acceleration £300
s2/turbo driveshafts pair £100

complete turbo cylinder head £400
turbo camshaft in tower complete £150
turbo sump with oil return and bolt £50
oil feed £20
oil return and bolt £30
bosch injectors on rail with damper /reg £100
aux water pump £45
MAF £85
exhaust manifold complete £100
crossover pipe £80
downpipe £45
dme ecu £200
pair of std turbo chips £25
j pipe £40
intercooler £85
oil cooler £60
engine block oil cooler/filter housing/pressure switch £125
expansion tank, turbo with 2 outlets £65
radiator and fans s2/turbo £80
dump valve £20
air oil separator and pipe £45
inlet manifold vapour blasted £100 (looks like new)

turbo steering shaft in good condition no play in ujs £60
knock sensor £10
pair of crank sensors on bracket £80
set of turbo beru leads £50
cambelt covers front and rear £40

set of 4 turbo low compression pistons on rods with rings all in vgc £150

k26/8 turbo slight play but looks good to use, or rebuild for piece of mind £225

k26/6 turbo in bits, ready for rebuild or hybrid etc £100

open to sensible offers on items, or can do a deal on multiples etc, or a package for the lot etc.

regards

Knock sensor please
and would you have Dme temp sensor near front cylinder
you have MAF for 85.00 i take it that is standard barn door air flow meter and not modern mass air flow sensor.

UK postage

hi sorry for delay.

i have both those parts as far as i know.

yes the MAF is standard 944t part.

can do knock and temp sensors for £40 delivered

pm me if you want the items.

regards

still got all of this