Porsche Enthusiasts Club Forum

It is currently Thu Jun 19, 2025 6:18 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: a bit of a nightmare
PostPosted: Wed Aug 06, 2008 11:16 pm 
Offline

Joined: Fri Jun 13, 2008 12:01 am
Posts: 102
Location: Atherton
TIPEC membership: 0
my 944 is turning into a bit of a nightmare :shock:
first i found oil in the water so off came the head,gasket ok but with all the pits on it i thought it better to have a new head £100 plus £70 for a skim and crack test.
then got an oil cooler cause mine had more oil in it than the middle east, new seal kit £35.
checked the brakes discs and pads,pads new rear discs new but the others past there best so got some new ones £32.
tried to take the pins out to put new pads and discs on................rusted solid :evil:
so looks like new calipers.
can some one please tell me what to expect next :roll: but do it gently.
moan over Dave
p.s. and i aint even started to think about the bit of bodywork yet


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 5:46 am 
Offline
Site Admin
Site Admin

Joined: Thu Jan 01, 1970 12:00 am
Posts: 5518
Location: Rochester, Kent
TIPEC membership: 911
Chin up fella, you'll have a great car by the time you have finished.

_________________
Kent & South East London R.O

Join the Club

Silver 1989 911 Speedster
Midnight Blue 2004 996 C4S Cab
Tahoe Blue 1990 964 C2
Zenith Blue 1998 BoxsterSold
Guards Red 1992 944 S2 Cab gone but not forgotten
Mediterranean Blue BMW 530e


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 7:39 am 
Offline

Joined: Mon Jul 21, 2008 4:44 pm
Posts: 589
Location: manchester/Congleton
TIPEC membership: 0
atherton in leigh?

if so i could possibly help bud

_________________
Image
http://www.gtonw.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 9:44 am 
Offline

Joined: Fri Jun 13, 2008 12:01 am
Posts: 102
Location: Atherton
TIPEC membership: 0
yep thats the place Colt :)


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 9:46 am 
Offline

Joined: Mon Jul 21, 2008 4:44 pm
Posts: 589
Location: manchester/Congleton
TIPEC membership: 0
if you get stuck mate give me a ring i'm sure the calipers will be fine after a revamping. 07935033535

dave

_________________
Image
http://www.gtonw.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 9:52 am 
Offline

Joined: Tue Feb 05, 2008 11:24 am
Posts: 12
Location: Warrington
TIPEC membership: 0
trx, I'm just down the road from you too if you need any moral support!


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 9:53 am 
Offline

Joined: Fri Jun 13, 2008 12:01 am
Posts: 102
Location: Atherton
TIPEC membership: 0
thanks colt was gonna ask you about the body work when the rest is done ,
got an hole in the same place where you did yours on the rear corner


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 10:59 am 
Offline

Joined: Mon Jul 21, 2008 4:44 pm
Posts: 589
Location: manchester/Congleton
TIPEC membership: 0
thats np mate just let me know when ;)

_________________
Image
http://www.gtonw.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Thu Aug 07, 2008 10:54 pm 
Offline

Joined: Fri Jun 13, 2008 12:01 am
Posts: 102
Location: Atherton
TIPEC membership: 0
thanks gents now i know why i got the 944 :D
trouble is i keep thinking of selling my little prefect and getting an s2
Dave


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Fri Aug 08, 2008 4:00 pm 
Offline

Joined: Mon Nov 05, 2007 6:24 pm
Posts: 3008
Location: Halifax
TIPEC membership: 4636
It's all part of lifes rich tapestry. If you paid less than 4K for your '44 then you have to expect a few teething problems! Doesn't sound too bad to me. :) (Have a spare pair of rear calipers refurbed if yours are leaking.)

_________________
944 lux, Eco car. Off the road more than it's on!
Audi 2.0 TDI Good but rather boring..........
944 now sold.


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Fri Aug 08, 2008 5:32 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Nov 04, 2007 7:43 pm
Posts: 12833
Location: Chatham, Kent
TIPEC membership: 4190
Yup the first 6-9 months are Bl00dy scary finding out what it's all like, I expected a big bill for the belts but the engine mounts were expensive as they took so much labour.

_________________
Jim

http://tipec.net/region_southeastlondon.php

2018 Mitsubishi Outlander PHEV
2005 Porsche Cayenne S SOLD
2000 Jeep Grand Cherokee SOLD
2010 Mazda MX5 Mk3.5 2.0 Sport Tech SOLD
2000 Porsche Boxster S SOLD
1987 Porsche 944
2019 Abarth 595C


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Fri Aug 08, 2008 5:40 pm 
Offline

Joined: Mon Jul 21, 2008 4:44 pm
Posts: 589
Location: manchester/Congleton
TIPEC membership: 0
all i will say is...... i will look after whoevers car and keep costs to a minimum. yes i'm trying to earn a living but if i spend 8 hours on a car i charge 6, if the hours go over 24 hours i'll drop the hourly rate. if its a simple job of a hour that can be done at the owners home then cover the fuel and make me a coffee ;). i can't be any fairer than that and i think i'm 8 quid cheaper than a small garage per hour. my love is for the job but i still have bills to pay....who ever bill is?

_________________
Image
http://www.gtonw.co.uk


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Fri Aug 08, 2008 6:34 pm 
Offline

Joined: Fri May 30, 2008 7:19 pm
Posts: 52
It's ok, put it on my duck.

_________________
Porsche 924 - Black, Original
Citroen ZX Diesel - White, large array of dents and scratches


Top
 Profile  
Reply with quote  
 Post subject: Re: a bit of a nightmare
PostPosted: Fri Aug 08, 2008 7:16 pm 
Offline

Joined: Mon Jul 21, 2008 4:44 pm
Posts: 589
Location: manchester/Congleton
TIPEC membership: 0
Rat wrote:
It's ok, put it on my duck.

quack! quack! :lol:

_________________
Image
http://www.gtonw.co.uk


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group