Breaking highly modified 924s track car

LarJammer · **Posted:** Sat Jan 18, 2014 12:17 pm

All parts available, a brief rundown of the parts - 944 s2 engine (has had a comprehensive rebuild), vitesse maf, 968 door handles & front roll bar, willwood front brakes, racers edge adjustable top mounts, kw v3 suspension (probably keep this for myself...), 951 lsd gearbox (probably keep this too...), glass fibre bonnet, weltmeister rear roll bar. Plus lots more I cant think of at the moment. Has a dash, door panels but non standard seats.

If you want any parts just let me know.

Hallsy · **Posted:** Sun Jan 19, 2014 6:26 pm

What diameter is the 968 rollbar and whereabouts are you located?

LarJammer · **Posted:** Mon Jan 20, 2014 1:07 pm

Its a 26.8mm bar. im based in milton keynes.

DaveM · **Posted:** Mon Jan 20, 2014 1:32 pm

Will those racers edge adjustable top mounts fit a ate 944? If so how much would you want posted? I'd be tempted with the KWs as well if you end up getting rid of them.

LarJammer · **Posted:** Mon Jan 20, 2014 4:32 pm

Ill check the part numbers tonight.

LarJammer · **Posted:** Mon Jan 20, 2014 7:01 pm

DaveM wrote:

Will those racers edge adjustable top mounts fit a ate 944? If so how much would you want posted? I'd be tempted with the KWs as well if you end up getting rid of them.

I have checked and the top mounts are the same part for all 924, 944 and 968 models. i' do them for £150 inc. postage. thats less than half the new price.

PawnSacrifice · **Posted:** Mon Jan 20, 2014 7:38 pm

Hi LarJammer, the Willwood brakes, what size discs do the run / size wheels do they need? And if you know, which ones are they? Oh, and do they have mounting brackets?
Thanks

LarJammer · **Posted:** Mon Jan 20, 2014 8:06 pm

PawnSacrifice wrote:

Hi LarJammer, the Willwood brakes, what size discs do the run / size wheels do they need? And if you know, which ones are they? Oh, and do they have mounting brackets?
Thanks

They are currently fitted on the standard 924s discs. the car is currently fitted with 16" d90 wheels. i dont know if they will fit under 15" wheels. I havent checked the spec of the calipers yet but they will be sold with the brackets if fitted.

PawnSacrifice · **Posted:** Mon Jan 20, 2014 8:16 pm

LarJammer wrote:

They are currently fitted on the standard 924s discs. the car is currently fitted with 16" d90 wheels. i dont know if they will fit under 15" wheels. I havent checked the spec of the calipers yet but they will be sold with the brackets if fitted.

Ooo, very tempting! Assuming they're no bigger than the stock callipers (which I don't think they would be), how much do you want for them?

LarJammer · **Posted:** Mon Jan 20, 2014 10:46 pm

PawnSacrifice wrote:

LarJammer wrote:

They are currently fitted on the standard 924s discs. the car is currently fitted with 16" d90 wheels. i dont know if they will fit under 15" wheels. I havent checked the spec of the calipers yet but they will be sold with the brackets if fitted.

Ooo, very tempting! Assuming they're no bigger than the stock callipers (which I don't think they would be), how much do you want for them?

i dont think they are much bigger which is quite impressibe for a 4 piston caliper. id like £150 plus p&p for the pair.

DaveM · **Posted:** Tue Jan 21, 2014 12:53 pm

LarJammer wrote:

DaveM wrote:

Will those racers edge adjustable top mounts fit a ate 944? If so how much would you want posted? I'd be tempted with the KWs as well if you end up getting rid of them.

I have checked and the top mounts are the same part for all 924, 944 and 968 models. i' do them for £150 inc. postage. thats less than half the new price.

I take it they still have the spacers, nuts, etc with them? If so I'll have them. I'll PM you but is there any chance of a photo.

LarJammer · **Posted:** Tue Jan 21, 2014 1:20 pm

DaveM wrote:

LarJammer wrote:

DaveM wrote:

Will those racers edge adjustable top mounts fit a ate 944? If so how much would you want posted? I'd be tempted with the KWs as well if you end up getting rid of them.

I have checked and the top mounts are the same part for all 924, 944 and 968 models. i' do them for £150 inc. postage. thats less than half the new price.

I take it they still have the spacers, nuts, etc with them? If so I'll have them. I'll PM you but is there any chance of a photo.

they are complete & still fitted to the car. ill sort you out some pictures tonight.

PawnSacrifice · **Posted:** Tue Jan 21, 2014 10:52 pm

LarJammer wrote:

PawnSacrifice wrote:

LarJammer wrote:

They are currently fitted on the standard 924s discs. the car is currently fitted with 16" d90 wheels. i dont know if they will fit under 15" wheels. I havent checked the spec of the calipers yet but they will be sold with the brackets if fitted.

Ooo, very tempting! Assuming they're no bigger than the stock callipers (which I don't think they would be), how much do you want for them?

i dont think they are much bigger which is quite impressibe for a 4 piston caliper. id like £150 plus p&p for the pair.

Very good price as a kit! Can't decide... I may come back to you on these, if no one else buys them while I'm deliberating. Thanks for the info.

jackjosh · **Posted:** Tue Jan 21, 2014 11:19 pm

What colour are the door cards and what condition are they in?

LarJammer · **Posted:** Wed Jan 22, 2014 7:08 am

jackjosh wrote:

What colour are the door cards and what condition are they in?

They are black / white pasha trim in very good condition.

Porsche Enthusiasts Club Forum

Breaking highly modified 924s track car

Who is online