Porsche Enthusiasts Club Forum

It is currently Sun Jun 22, 2025 9:51 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: 944 S2 Front Body Panels Needed
PostPosted: Mon Sep 23, 2013 10:40 am 
Offline

Joined: Tue Apr 30, 2013 8:34 am
Posts: 14
TIPEC membership: 0
Hi Guys,

Now I have finished crying, I have come on here in the hope that someone may be able to help with getting me the below parts after an argument with another car this morning(thankfully low speed, so no structural damage, just aesthetic).

The car is a 944 S2, so it will be Turbo/S2 parts I need, if they are in very good condition in Guards Red, that would be fantastic, but I realise that might not happen, so if it's another colour(as long as its straight) then that will be ok.

The parts I need are:

-Front Bumper.

-Front Badge Panel.

-Passenger side(O/S) headlight cover.

-Possibly a passenger side wing, but I need to double check this when I get home as the current one 'might' be ok for a repair as the only damage is where it meets the badge panel.

-Possibly might need a bumper support bar but will find out once the bumper is off tonight.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Mon Sep 23, 2013 5:12 pm 
Offline

Joined: Mon Jan 24, 2011 6:40 pm
Posts: 190
Location: Ripon
TIPEC membership: 0
Sorry to hear your troubles , there is a new badge panel on ebay at a good price.

Nick


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Mon Sep 23, 2013 6:26 pm 
Offline

Joined: Sun Jan 24, 2010 12:07 am
Posts: 2381
TIPEC membership: 0
That's not S2/ turbo

I MIT have a head light lid. Will let you know

_________________
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Tue Sep 24, 2013 8:17 am 
Offline

Joined: Tue Apr 30, 2013 8:34 am
Posts: 14
TIPEC membership: 0
EDDIE wrote:
Sorry to hear your troubles , there is a new badge panel on ebay at a good price.

Nick


t3rra wrote:
That's not S2/ turbo

I MIT have a head light lid. Will let you know


Thanks for the replies guys, unfortunately the new badge panel is not for an S2, the only one on there for an S2 is a tatty one at £60, I might end up getting it and just hoping that it's a straight panel.

If you have a headlight lid, that would be fantastic as I'm struggling to find any about for an S2.

Thanks

Marc


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Tue Sep 24, 2013 9:17 am 
Offline

Joined: Tue Sep 28, 2010 10:14 pm
Posts: 329
Location: Edinburgh
TIPEC membership: 0
Marc, where are based ? I know of a red s2 being broken about 20 miles from Edinburgh.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Tue Sep 24, 2013 11:48 am 
Offline

Joined: Tue Apr 30, 2013 8:34 am
Posts: 14
TIPEC membership: 0
simkin911 wrote:
Marc, where are based ? I know of a red s2 being broken about 20 miles from Edinburgh.


Thanks for the information, I'm based in Harrogate, so a fair distance away unfortunately, but if they are willing to package parts then I can arrange a courier for collection, is it a private sale or is it at a scrapyard?


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Tue Sep 24, 2013 9:36 pm 
Offline
User avatar

Joined: Sat Apr 19, 2008 10:14 am
Posts: 1189
Location: Warrington, Cheshire
TIPEC membership: 0
I have a red badge panel in the garage that I'm not going to use. It looks straight and clean but when I tried fitting it to the turbo the bracket inside it wouldn't clear the intercooler. I paid £40 for it and would let it go for that. Let me dig it out and get you a couple of photos.

_________________
'88 944 Turbo S
Slowly being modified. APexi AVC-R, MAF and in bits all over the garage!
'94 968 Sport
KW's and the daily drive.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 9:04 am 
Offline

Joined: Tue Sep 28, 2010 10:14 pm
Posts: 329
Location: Edinburgh
TIPEC membership: 0
Marc_P wrote:
simkin911 wrote:
Marc, where are based ? I know of a red s2 being broken about 20 miles from Edinburgh.


Thanks for the information, I'm based in Harrogate, so a fair distance away unfortunately, but if they are willing to package parts then I can arrange a courier for collection, is it a private sale or is it at a scrapyard?


Private seller in Fife, likely to be flexible. I will dig out the details I have if you are interested - I don't know the seller myself.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 11:27 am 
Offline

Joined: Tue Apr 30, 2013 8:34 am
Posts: 14
TIPEC membership: 0
DaveM wrote:
I have a red badge panel in the garage that I'm not going to use. It looks straight and clean but when I tried fitting it to the turbo the bracket inside it wouldn't clear the intercooler. I paid £40 for it and would let it go for that. Let me dig it out and get you a couple of photos.


Sounds good to me, I'll take it :)

PM we your payment details and I can send the money over at some point today.


simkin911 wrote:
Marc_P wrote:
simkin911 wrote:
Marc, where are based ? I know of a red s2 being broken about 20 miles from Edinburgh.


Thanks for the information, I'm based in Harrogate, so a fair distance away unfortunately, but if they are willing to package parts then I can arrange a courier for collection, is it a private sale or is it at a scrapyard?


Private seller in Fife, likely to be flexible. I will dig out the details I have if you are interested - I don't know the seller myself.


If you could dig out the details, it would be really appreciated.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 2:49 pm 
Offline
User avatar

Joined: Sat Apr 19, 2008 10:14 am
Posts: 1189
Location: Warrington, Cheshire
TIPEC membership: 0
Marc_P wrote:
DaveM wrote:
I have a red badge panel in the garage that I'm not going to use. It looks straight and clean but when I tried fitting it to the turbo the bracket inside it wouldn't clear the intercooler. I paid £40 for it and would let it go for that. Let me dig it out and get you a couple of photos.


Sounds good to me, I'll take it :)

PM we your payment details and I can send the money over at some point today.


Just before you do have a look at the photos and see if you can see anything wrong with it. I can't but can't figure out why it won't fit mine either. I've put my existing panel next to it on the photo for comparison.

Image

Image

Image

_________________
'88 944 Turbo S
Slowly being modified. APexi AVC-R, MAF and in bits all over the garage!
'94 968 Sport
KW's and the daily drive.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 4:26 pm 
Offline

Joined: Tue Apr 30, 2013 8:34 am
Posts: 14
TIPEC membership: 0
DaveM wrote:
Marc_P wrote:
DaveM wrote:
I have a red badge panel in the garage that I'm not going to use. It looks straight and clean but when I tried fitting it to the turbo the bracket inside it wouldn't clear the intercooler. I paid £40 for it and would let it go for that. Let me dig it out and get you a couple of photos.


Sounds good to me, I'll take it :)

PM we your payment details and I can send the money over at some point today.


Just before you do have a look at the photos and see if you can see anything wrong with it. I can't but can't figure out why it won't fit mine either. I've put my existing panel next to it on the photo for comparison.

[img]http://i7.photobucket.com/albums/y293/catsmum/image-11.jpg[img]

[img]http://i7.photobucket.com/albums/y293/catsmum/image-10.jpg[img]

[img]http://i7.photobucket.com/albums/y293/catsmum/image-9.jpg[img]


Hi Dave, thanks for that, I'll probably still have it, if it doesn't fit, on my head be it.

I'll get mine off tonight and just have a look at those outer mounting tabs as that is the only difference I can see, but I'll get back to you either tonight or tomorrow morning anyway.

Thanks again.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 6:04 pm 
Offline

Joined: Tue Sep 28, 2010 10:14 pm
Posts: 329
Location: Edinburgh
TIPEC membership: 0
PM sent with the contact details.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 8:32 pm 
Offline

Joined: Sun Jan 24, 2010 12:07 am
Posts: 2381
TIPEC membership: 0
Difference looks like the inside skin to the front nose. Red ones seems to wing back slightly where the silver ones straighter.

Is that where it was hitting the Ic?

_________________
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 9:27 pm 
Offline
User avatar

Joined: Sat Apr 19, 2008 10:14 am
Posts: 1189
Location: Warrington, Cheshire
TIPEC membership: 0
The outer panel looks exactly the same to me. I've lined the two up against each other and the top edge, bottom edge and the tabs under the headlights all line up. The bracket underneath it seems different some how as that is what is hitting the intercooler. I tried bending it back by hand and it still doesn't fit. I didn't want to damage the outer panel because its in such good condition so didn't get the hammer out.

Marc I'll PM you my details.

_________________
'88 944 Turbo S
Slowly being modified. APexi AVC-R, MAF and in bits all over the garage!
'94 968 Sport
KW's and the daily drive.


Top
 Profile  
Reply with quote  
 Post subject: Re: 944 S2 Front Body Panels Needed
PostPosted: Wed Sep 25, 2013 9:50 pm 
Offline

Joined: Sun Jan 24, 2010 12:07 am
Posts: 2381
TIPEC membership: 0
As guys s2 and don't have intercooler, just air box I don't think it will be a problem, can see intercooler out line on silver badge pannle.

_________________
Zermatt 88 944 turbo
Augtronic ecu&map
3071gtx/0.63tial V band/38mm Dpw
3" fastroad exhaust
80lb injectors
Stage2 intercooler
Apexi ebc.
9xx quick shift/ front shift/fuel pump
M030 brakes/Coilovers/30mm front roll
18" JARA cups 225F/285R


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group