Parts clearout - You tell us what you want and make an offer

LilMsPiggy · **Posted:** Sun Apr 28, 2013 9:27 pm

Hi Jon, do you have a bonnet release cable and the plastic cable holder that screws into the passengers footwell complete with the release handle for a 1988 944S. Thanks Ian.

mr2haz · **Posted:** Mon Apr 29, 2013 5:28 am

mr2haz wrote:

jmgarage wrote:

mr2haz wrote:

I haven't had a reply to my pm on the 6th February, should I resend it?

Found it, some how I missed it!

I think we were waiting to see if one of the cars next in line to come into the workshop for destruction would have some of the parts you need, but have been so busy worth usual Porsche repairs, servicing and tuning work, we have not had a lift free to break up another S2.

I will see what I can do.

Rather keen on adding these finishing touches by the end of the month, any news?

Any luck with these, I forgot about this thread for a while.

Thenutinthemiddle · **Posted:** Wed May 01, 2013 4:26 pm

Hey Jon

I'm still after a classic grey dashboard to fit a 1991 944S2.

Have you started stripping out that 968 yet?

Paul

DonLogan · **Posted:** Thu May 09, 2013 1:35 pm

Hi Jon/Jamie

Do you have any of the early type strut mounts - the rubber doughnut with the bearing?

If not, I could do with the sleeve insert from a worn set if you have them, think it's part 825 412 365 which is no longer available according to OPC as I'm hatching a cunning plan to use VW Polo mounts.

Cheers
Rik

ryan 944 · **Posted:** Mon May 13, 2013 10:43 pm

Hi i am after a Single Genuine Porsche Crested Valve Cap Tequipment type as I have lost one, can you help?

Thanks Ryan

Pete82 · **Posted:** Fri May 24, 2013 11:13 pm

i'm after a bell housing from a 924 (931?) turbo that has the hydraulic clutch setup (i think the part number is possibly - 931.116.401 2R) or if at worst and one of these is not available then just any bellhousing from a 924 so I can mock up some stuff.

Also do you have any seats like this

thanks

Gary Howard · **Posted:** Sat May 25, 2013 7:12 am

Morning John,
Do you have a window switch cover for the drivers side?
944 oval dash?

Cheers, Gary

RogerM · **Posted:** Sat May 25, 2013 10:36 am

Hi, do you have the insert / pocket that fits below a single din head unit in a 944s2 console £?

1991 944S2 near side hockey stick £?

Jonny 46 · **Posted:** Tue May 28, 2013 7:34 pm

Hi,
Have you uncovered any 944 aluminium spares? The part number is 951 362 131 and either 00 or 01 depending on colour. I think they came in 928s too. Let me know if you do please.
Regards,
John

frenchy · **Posted:** Tue Jun 04, 2013 9:02 pm

Jon, any update on the bits required by moi, see previous page.
Jim.

SteveK · **Posted:** Fri Jun 14, 2013 10:18 am

Hi, I notice this is an old thread but worth a shot if there are parts still lurking.

944 S2 ('90) Clutch Master Cylinder
944 S2 ('90) Handbrake Cable
944 S2 ('90) Offside Front Outer Anti-roll suspension linkage/bracket

I'm honestly not sure what I should be offering so if you could let me know what you'd be willing to accept I can either email or give you a call to arrange postage?

Many thanks!

pad944968 · **Posted:** Fri Jun 14, 2013 11:16 pm

Thenutinthemiddle wrote:

Hey Jon

I'm still after a classic grey dashboard to fit a 1991 944S2.

Have you started stripping out that 968 yet?

Paul

If it helps with splitting the interior I would be interested in the door panels.

944er · **Posted:** Mon Jul 01, 2013 12:09 pm

Jon, any chance you have an LCD clock for an oval dash 944? And also rear seatbelts (all parts)?

Cheers

andycowman · **Posted:** Mon Jul 08, 2013 2:02 pm

Hi Jon

Looking for an AC Compressor and the bracket that holds it to the engine

erm £50?!

Thanks

Andy

stevew · **Posted:** Sun Jul 21, 2013 6:16 pm

Hi, do you have a pair of good condition cream pinstripe front seats? it's the insert that's needed really
Steve

Porsche Enthusiasts Club Forum

Parts clearout - You tell us what you want and make an offer

Who is online