GT3 dyno run

996, 997 and 991 discussion area

Moderator: Moderators

Post Reply
Madblackpoollad
Posts: 4
Joined: Sat Oct 20, 2012 5:54 pm
TIPEC membership: 0

GT3 dyno run

Post by Madblackpoollad »

I've had my 996 GT3 in for setup and dyno run today, the guys did a fantastic job.

http://m.youtube.com/watch?feature=plcp&v=gyVYZjUI8So
Lee 944
Posts: 2291
Joined: Fri Feb 26, 2010 9:05 pm
TIPEC membership: 6030
Location: Lanark
Contact:

Re: GT3 dyno run

Post by Lee 944 »

Looks like fun, I've always fancied a dyno run but never actually done it.
Lee.

JOIN THE CLUB, CLICK HERE

2003 996TT

Due to the current economic climate, the light at the end of the tunnel has been switched off!
Sean Smallman
Site Admin
Site Admin
Posts: 5518
Joined: Thu Jan 01, 1970 1:00 am
TIPEC membership: 911
Location: Rochester, Kent

Re: GT3 dyno run

Post by Sean Smallman »

Dyno Days are good fun as a group :)

You will need to disconnect your front wheels from the 4 wheel drive system.
Kent & South East London R.O

Join the Club

Silver 1989 911 Speedster
Midnight Blue 2004 996 C4S Cab
Tahoe Blue 1990 964 C2
Zenith Blue 1998 BoxsterSold
Guards Red 1992 944 S2 Cab gone but not forgotten
Mediterranean Blue BMW 530e
Lee 944
Posts: 2291
Joined: Fri Feb 26, 2010 9:05 pm
TIPEC membership: 6030
Location: Lanark
Contact:

Re: GT3 dyno run

Post by Lee 944 »

The day we had in Scotland before, Mike Dowie had organised a TIPEC day, was at Extreme in Whitburn. They can do 4 wheel drive, but can't do any airflow through the inter coolers. :(

Manthey assure me it is at least 510 bhp, which is enough for our roads. :D
Lee.

JOIN THE CLUB, CLICK HERE

2003 996TT

Due to the current economic climate, the light at the end of the tunnel has been switched off!
Post Reply