944 2.7 Foot Well Heating (1989)

924, 944 and 968 discussion area

Moderator: Moderators

Post Reply
Queen_Ashford
Posts: 7
Joined: Mon Aug 07, 2023 10:36 am
TIPEC membership: 10700
Location: Kent

944 2.7 Foot Well Heating (1989)

Post by Queen_Ashford »

So the heating system on my car has always been pretty good, still is. All the buttons on the Havac seem to respond OK. Except, I can't get heat in the footwell. Face and Windscreen are fine. Hot/Cold are fine. Recirculation (vent flaps in engine bay vacuum open and close) works fine. Fan speed works fine. Car not fitted with AC option.

Just can't get heat to my feet!!!

Any pointers?

Thank you R :D
2.7 1989 944 8V
User avatar
hotblack944
Site Admin
Site Admin
Posts: 1120
Joined: Sun Nov 04, 2007 1:48 pm
TIPEC membership: 4746
Location: Wimborne, Dorset
Contact:

Re: 944 2.7 Foot Well Heating (1989)

Post by hotblack944 »

Not sure if this will help? https://www.clarks-garage.com/shop-manual/hvac-01.htm

Usual failure mode is broken plastic clips but that fails to full heat.
Jim Tarrant

ARO Southern
Website & Forum Admin
1991 944 S2 black/grey
1986 944 Lux red/black


JOIN THE CLUB
Post Reply