Porsche Enthusiasts Club Forum

Can any one offer advice, I repainted my existing bumper, which was not original, sanded it back to bare PU and repainted. All was dandy till some one who had better be nameless but was not me,bumped it and the paint all crazed again. Aargh! After all the effort.
I bought another old bumper moulding, in better condition and not fiddled about with to repaint. What would you guys advise?

The best way and cheapest way is to only prep the Pu down to original base paint layer or good paint . Other wise you have to use a sepcial plastic primer.