Page 1 of 1

Wanted to borrow OPVR 944

Posted: Sun Jul 29, 2018 9:29 am
by broady_6
Good Morning,

Following my thread here http://forums.tipec.net/viewtopic.php?f=25&t=23463

Would anyone be willing to lend me an OPRV ideally newer style for my early 944 for me to test, before I spend the eye watering amount. Happy to provide a few beer tokens to yourself.

Or better yet does anyone have one which should it cure the problem, i could by for a reasonable price?

Ta

Re: Wanted to borrow OPVR 944

Posted: Sat Aug 11, 2018 10:30 am
by Crank Case
Did you manage to get a lend of an OPVR valve?

Your thread threw up a question. My oil pressure sits at 5 bar unless it's idling. Now that's either:

1) Normal
2) because I had the instrument cluster out to replace bulbs with led's and other bits and pieces which compromised the needle or
3) because my OPRV needs looking at.

I am pretty sure I could extract one for you.

Re: Wanted to borrow OPVR 944

Posted: Sat Aug 11, 2018 10:33 am
by broady_6
Thanks for remind me of this post, yes i was kindly leant one to try. It didn't solve the problem. But help. So I'm still not certain the engine is healthy. but its as well as it going to be until November