Wanted - Later Rear Wiper Arm for 944

[omaltby]

Hi all,

I'm looking for a later rear wiper arm for a 944, I believe the part number is 944 628 032 00

If anyone has a spare one please let me know.

Many thanks,

Oliver

[Crank Case]

Oliver, did you get sorted?

[omaltby]

Oliver, did you get sorted?

Hi Rob, no I'm still on the lookout for this

[Crank Case]

Oliver, did you get sorted?

Hi Rob, no I'm still on the lookout for this

I looked but the spare one I have doesn't match the part number of the one you are looking for.

Have you gone through the list of breakers listed on this site?

[omaltby]

Oliver, did you get sorted?

Hi Rob, no I'm still on the lookout for this

Oliver, did you get sorted?

Hi Rob, no I'm still on the lookout for this

I looked but the spare one I have doesn't match the part number of the one you are looking for.

Have you gone through the list of breakers listed on this site?

I've tried a few of the breakers - no luck sadly.

Just to double check - is your spare arm like the picture below? I.e. has a pin or is it the later one with a hook instead?

20180422_203724.jpg (143.37 KiB) Viewed 8894 times

Thanks,

Oliver

[Crank Case]

I'll have a look.

Dunno when; probably towards the end of the week.

[omaltby]

Appreciated

[Crank Case]

There's 2 on fleabay that may match:

https://www.ebay.co.uk/itm/Porsche-924S ... SwOhVZs8Pr

https://www.ebay.co.uk/itm/Porsche-924- ... SwfxJZ6NIK

[omaltby]

They both use a pin unfortunately!

Thanks for the suggestion though.

[caprixpack]

Just as a cautionary note, the later style wiper arm doesn't work with the early wiper motor as the spindles are different sizes. I too wanted rid of the original pin style arm on my 924, bought a 944 s2 arm and found the the early spindle is smaller than the later. Anyway I fitted the wiper motor off a 968 and it's all good.

DSC_0642_zpsamq5p4zo.jpg (77.84 KiB) Viewed 8874 times

[Crank Case]

Just as a cautionary note, the later style wiper arm doesn't work with the early wiper motor as the spindles are different sizes.

Could you theoretically change the motor over?

[caprixpack]

Yeah, see above. Just edited the post.

[Crank Case]

Yeah, see above. Just edited the post.

That's the solution for the OP.