Porsche Enthusiasts Club Forum

Hi,

Wondering if anyone has these available. I need the bolts that go through the seat to hold in the bottom of the 3 point belt and the receiver.
OPC dont have the ones on the transmission tunnel for the receiver anymore.

Thanks

Edit: For a 1988 944

The bolts will be listed on the PET with the dimensions you can then give the spec to any fixings supplier and order them.

They are not metric threads think they are UNF

I might actually have some but they are with a complete set of rear seat belts and I don't really want to separate them. I don't have a car to put them in as mine has no rear seats, so am willing to sell the set but not to break it up into individual parts.

Thanks for your help.

I looked them up in PET and purchased some bolts on ebay.
I didnt need the whole assembly as I am replacing the looped harness bolts.

Thanks again!

Just a note for the future. If porsche say something is not available for whatever 944 you have, search for the equivalent part on a 968 and they will have it and 90% of the time it will be the same part with an updated part number.