924 / 944 / 968 DIY coil over setup plus narrowed Powersteer
Posted: Thu Jan 14, 2016 11:29 am
I have a set of coil overs complete with spindles, hubs discs calipers from my 1987 944S - £300 complete
The coilovers are off a VW but I have changed the top mounts to 944 ones and changed the strut insert with new Boge inserts. I used these with my early offset setup, I would recommend buying camber adjustment plates, it worked fine but there was no camber adjustment.
I also have a power steering rack complete with pump and shaft, this was form the same car but I narrowed/ shortened the steering rods to alloy the use of steel early offset trailing arms on a late car. - £100
pair of steel arms off the same car - £40
The coilovers are off a VW but I have changed the top mounts to 944 ones and changed the strut insert with new Boge inserts. I used these with my early offset setup, I would recommend buying camber adjustment plates, it worked fine but there was no camber adjustment.
I also have a power steering rack complete with pump and shaft, this was form the same car but I narrowed/ shortened the steering rods to alloy the use of steel early offset trailing arms on a late car. - £100
pair of steel arms off the same car - £40