924, 944 and 968 discussion area
Moderator: Moderators
kongsodoken
Posts: 1138 Joined: Fri Nov 05, 2010 10:55 pm
TIPEC membership: 6926
Post
by kongsodoken » Sun Mar 06, 2016 5:22 pm
cars back home engine runs but still loads to do
no vacuum system, and loads of cleaning plus I need to change out the hose clamps for yellow/gold ones
Got to sort that Silver dump valve
fitted the power-steering pump and high pressure line today
Prophead
Posts: 574 Joined: Fri Jun 12, 2015 5:02 pm
TIPEC membership: 7406
Post
by Prophead » Sun Mar 06, 2016 5:27 pm
looking awesome!
MichaelW944
Posts: 531 Joined: Sun Aug 09, 2015 9:34 am
TIPEC membership: 7496
Location: Peterborough
Post
by MichaelW944 » Sun Mar 06, 2016 6:28 pm
This is one of those projects that you'd say 'you could eat your dinner off that engine' the truth is that you'd not want to dirty the engine with the food.
Porsche 944 2.7 Sold March 2018
Audi A6 3.0TDI LeMans Daily driver
Porsche 911 997 Carrera S in slate grey Purchased October 2018
ARO Peterborough Region
Waylander
Posts: 2736 Joined: Tue Nov 19, 2013 10:48 am
TIPEC membership: 0
Location: West Essex
Post
by Waylander » Wed Mar 09, 2016 8:32 pm
You should live in Essex with all that bling going on
1992 968 Coupe Cobalt Blue
1985 Honda VF1000 F2 Bol D'or In Silver
2013 A4 177 TDI Quattro Ibis White
2013 Volvo XC60 D5 brilliant car
action84
Posts: 58 Joined: Mon Jul 27, 2015 2:23 pm
TIPEC membership: 0
Post
by action84 » Wed Mar 16, 2016 6:35 pm
This is exceptional
Sconhead
Posts: 81 Joined: Tue Jun 23, 2015 7:06 am
TIPEC membership: 0
Location: Shrewsbury
Post
by Sconhead » Sun May 15, 2016 9:59 pm
Hi
Where did you manage to source the black plastic bearings in the light linkage assembly?
Thanks
Sam
Carrera RSR
Posts: 838 Joined: Thu Oct 07, 2010 1:38 pm
TIPEC membership: 6379
Location: Somerset
Post
by Carrera RSR » Mon May 16, 2016 9:14 am
You've got 3 weeks to get it ready for Simply Porsche
Steve
1980 924 Turbo Series 1 -
Alpine White &
Guards Red
Omega forged pistons, Piper cam, K27/26 hybrid turbo, 951 ducted FMIC, custom intake, Mittelmotor/123ignition, Hayward & Scott, GAZ Golds, Fuch'ed, Quaife LSD
kongsodoken
Posts: 1138 Joined: Fri Nov 05, 2010 10:55 pm
TIPEC membership: 6926
Post
by kongsodoken » Mon May 16, 2016 6:10 pm
Sconhead wrote: Hi
Where did you manage to source the black plastic bearings in the light linkage assembly?
Thanks
Sam
Available from porsche they are cheap
No chance in 3 weeks......house move has slowed me up but the 3 car garage will help when it's built
Sconhead
Posts: 81 Joined: Tue Jun 23, 2015 7:06 am
TIPEC membership: 0
Location: Shrewsbury
Post
by Sconhead » Tue May 17, 2016 9:32 pm
I can't find them in PET....
I can find the larger bushes, did you dissassemble the lamp linkage where it's
Pressed together in order to plate it?
Thanks for your help
Sam
kongsodoken
Posts: 1138 Joined: Fri Nov 05, 2010 10:55 pm
TIPEC membership: 6926
Post
by kongsodoken » Tue May 17, 2016 10:18 pm
No I plated the linkage assembled just have to wire the link to the shaft so it has electrical connection
Are you talking about the bush that goes in the end of the light pod? Theses are the only ones available the ones on the link come with the whole assay I don't think they are available separately
kongsodoken
Posts: 1138 Joined: Fri Nov 05, 2010 10:55 pm
TIPEC membership: 6926
Post
by kongsodoken » Sun Jun 05, 2016 6:07 pm
engine bay almost complete new airbox and all gold hose clips
fitted all the under body protection
fitted the neatest boost controller I could find expensive but very well made
still much to do but MOT next week
MichaelW944
Posts: 531 Joined: Sun Aug 09, 2015 9:34 am
TIPEC membership: 7496
Location: Peterborough
Post
by MichaelW944 » Sun Jun 05, 2016 6:23 pm
Don't go and fail on insufficient water from the washers!
Porsche 944 2.7 Sold March 2018
Audi A6 3.0TDI LeMans Daily driver
Porsche 911 997 Carrera S in slate grey Purchased October 2018
ARO Peterborough Region
KennyP
Posts: 100 Joined: Thu Sep 18, 2014 9:36 pm
TIPEC membership: 0
Post
by KennyP » Sun Jun 05, 2016 7:34 pm
^^^ That, is just lovely
KennyP