Page 3 of 4
Re: Breaking 944 S2
Posted: Sun Mar 30, 2014 6:53 am
by phido
Looking for:
S2 engine
S2 DME
S2 AFM
S2 wiring harness all wiring in engine bay
S2 flywheel
S2 throttle cable
S2 clutch
S2 gearbox
but needs to be packed up and sent to Australia. I will be able to enlist the help of a packing company to properly pack it up. Have you still got these items?
Re: Breaking 944 S2
Posted: Sun Mar 30, 2014 8:49 am
by mr2haz
The heater control panel has gone but the car did not have air con.
Re: Breaking 944 S2
Posted: Sun Mar 30, 2014 8:52 am
by Porker
OK thanks for confirming
Re: Breaking 944 S2
Posted: Sun Apr 20, 2014 7:45 pm
by s2sam
hi im after the pop up light motor relay 5 pin type .its on the motor itself under rubber cover part no 944.615.202.00 thanks sam
Re: Breaking 944 S2
Posted: Thu Jul 10, 2014 11:53 pm
by mr2haz
Bump.
I really should get round to getting this gone.
Re: Breaking 944 S2
Posted: Fri Jul 11, 2014 12:09 am
by Porker
does it have a functioning black boot privacy screen roller whatsit? Mine now stops rolling with about 12 inches to go and I have no desire to drill out rivets to wind the spring
ta
Re: Breaking 944 S2
Posted: Fri Jul 11, 2014 8:35 am
by mr2haz
Porker wrote:does it have a functioning black boot privacy screen roller whatsit? Mine now stops rolling with about 12 inches to go and I have no desire to drill out rivets to wind the spring
ta
I have the part but it has also stopped retracting so would require a rebuild.
Re: Breaking 944 S2
Posted: Fri Jul 11, 2014 9:50 am
by Porker
OK thanks anyway
I have the Clark's guide
Re: Breaking 944 S2
Posted: Mon Jul 21, 2014 3:59 pm
by Hallsy
Mr2haz - do you have the collapsible spare wheel?
Re: Breaking 944 S2
Posted: Mon Jul 21, 2014 9:36 pm
by mr2haz
Hallsy wrote:Mr2haz - do you have the collapsible spare wheel?
Sorry there is no spare wheel available.
Re: Breaking 944 S2
Posted: Fri Aug 22, 2014 11:52 am
by nikisporsche
I am looking for an engine S2 3.0ltr is it still available?
Re: Breaking 944 S2
Posted: Sat Aug 23, 2014 10:58 am
by mr2haz
nikisporsche wrote:I am looking for an engine S2 3.0ltr is it still available?
It is, PM coming your way.
Re: Breaking 944 S2
Posted: Sat Aug 23, 2014 12:36 pm
by 944-Scott
mr2haz wrote:nikisporsche wrote:I am looking for an engine S2 3.0ltr is it still available?
It is, PM coming your way.
I hope this works out as a good deal for both of you
Re: Breaking 944 S2
Posted: Tue Aug 26, 2014 4:56 pm
by Oct
Are you able to cut any panels out? Specifically near side rear wheel arch?
Re: Breaking 944 S2
Posted: Tue Aug 26, 2014 9:09 pm
by mr2haz
I don't see why not but wouldn't cut anything without the engine selling first.