928 lights

[Bizman928]

Hi Brett

Many thanks - hope your safe and well!

While you are working in the centre console area, we have just launched a new product - 928 Centre Console decals - just to finish off all the centre console bringing back up to how it was shipped.

https://woodypeck.com/product/928-centr ... ay-decals/

[Brett928S2]

Hi Steve

I have already got the aluminium window switches from the US a few years ago... or I would have bought them...

Anything else new coming for me to buy ??

All the best Brett

[Bizman928]

Hi Brett

Well yes, we are just machining the first of the steering rack bushes in a custom design from POM-H material.
We are also doing the first cut runs of our "Chin guards" to help protect the alternator and help stop the car bottoming out on sleeping policeman and kerbs.

Will keep you posted.

Regards
Steve

[potdog]

Hi all And Brett 928 S4 GT GTS Chin Protection Plates on Ebay @ £110 with FREE P&P. Next and being made now LHD / RHD Aluminium Header Tanks.

[Brett928S2]

Hi Steve

Bought the shift light kit from your website...

Will buy the ally headers tank whenever they are ready

All the best Brett

[Bizman928]

Hi Brett

Many thanks for your order for the shifter LED upgrade bulb conversion. Always a pleasure!

I will let you know when the 928 S4 and S2 Chin protector plates are up on our site. We will be offering the set for £85 each!

Watch this space!

Regards
Steve

[AlexS]

Hi Alex

Yes this is a simple fit - I managed to do it!
Comes with everything you need - plug & play easy fit to do

Just got around to ordering one of these; hopefully I'm not so ham-fisted that I muck it up!

[Bizman928]

Hi Alex

Thank you for your order. Just about to leave for the post run so I will get yours packaged up and sent out right away - instant shipping from order taken.

Can talk you through it if you contact me when your about to fit them.

Many Thanks. Steve

https://woodypeck.com/product/928-auto- ... -bulb-kit/

[AlexS]

Hi Alex

Thank you for your order. Just about to leave for the post run so I will get yours packaged up and sent out right away - instant shipping from order taken.

Can talk you through it if you contact me when your about to fit them.

Many Thanks. Steve

https://woodypeck.com/product/928-auto- ... -bulb-kit/

Morning all,

Had a good day working on the 928 yesterday; I’ve replaced the window, roof and wiper switches with brand new Porsche replacements - they feel so nice to use! (Sad I know, but it means a lot to me...)

I’ve also gone to fit the light for the gears, but for the life of me I can’t work out where the LED panel should go, and the instructions are a bit on the small side for me to really understand - probably a reflection on my eyesight than anything else!

Here’s a pic of the area that it’s supposed to go, but where exactly do I put it?!

Thanks as always!!

[Bizman928]

Morning Alex

Sorry if the images were to small on the instructions. The LED panel fits on either the right side or left side - which ever has more room - using the clips provided. See the image below.
The clips fit onto the metal rim of the body as shown.
Any more questions give me a call or PM me direct. woodypeck@outlook.com

Gear Shift Illumination Installation 2.jpg (189.01 KiB) Viewed 12666 times

[Bizman928]

The Chin protector plates for the S and S4 are now available from woodypeck.com for £75 for a pair/set

https://woodypeck.com/product/porsche-9 ... s4-gt-gts/

Many thanks
Steve
www.woodypeck.com
#928 #Porsche928

Hi Brett

Many thanks for your order for the shifter LED upgrade bulb conversion. Always a pleasure!

I will let you know when the 928 S4 and S2 Chin protector plates are up on our site. We will be offering the set for £85 each!

Watch this space!

Regards
Steve