
Also how did the noise thing go. Your car sounds really quiet! Some of the track days I've seen have had way too many cars on track at the same time. But that looked about right!
Tyre are now dead - but I either get or buy tyres with 1-3mm tread for peanuts and use them on a couple of track days before binning them - hence 2 sets of wheels. Brake pads are EBC Red's and held up fine. No fade, no problems but that could also be because I changed the fluid for ATE Racing Blue last year and fitted braided hoses at the same time. I used 2 litres of oil and shed loads of petrol, otherwise, no expenseJ.J. wrote:Good vid'Thanks for sharing it! Out of interest. And for future reference. How did the tyres & brake pads hold up?
Also how did the noise thing go. Your car sounds really quiet! Some of the track days I've seen have had way too many cars on track at the same time. But that looked about right!
Oooh, I would soooo love to, but I fear I might not get a pass out so soondarronwall wrote:anyone up for june 28th??
Apparently total failure of the electronics so a replacement is on route no questions asked. I know enough of John Speake's work to know this is extremely unusual and his after sales service and response to my problem have been first rate.zola1 wrote:Glad you got to the bottom of it, did he say what the failure was (hot wire open circuit, they do 1000 deg C milisecond burn off at key off )..Is it in limp home mode or is it just a component failure and straight forward replace and run up ?
cheers
Tempting but June & July are really busy on the club calendar and I'm running out of "Day out passes" from my other halfdarronwall wrote:get it back to brunters on june 28th id love to hear that gunning it past the "pit" area!!
That's brilliant Paul - look forward to seeing her at Prescott.PaulPSB wrote:An update on my 928 breakdown at Brunty. After checking by JDS Porsche it would appear the MAF has failed totally - an incredibly rare occurence as it was only fitted in January![]()
Anyway John is sending me a replacement in the post so I should be sorted over the weekend