CUP 1 WHEELQ'S

[zola1]

Hi,

Can any one shed any light :-

Got Cup 1's on my 87myr 944 Rears :-

PORSCHE CUP 1 WHEEL SIZE.jpg

This one reads ET49

PORSCHE CUP 1 WHEEL SIZE.jpg

PORSCHE CUP1 WHEEL April 08 008.jpg

PORSCHE CUP1 WHEEL April 08 008.jpg

1). I'm not sure if they are Porsche OEM wheels as i have read that they would have pt no stamped on the beginning with 944 *** or 911 *** ???


2).They are 9J x 17" thats a lot bigger than the std wheels, ..has any one got similar sized wheels on their 944, if yes what sort of suspension/tyre combo did you go for to avoid the harsh ride (tw the s/abs and bushes etc are all the original , makes for quite a unforgiving hard set up on Michelin Co-pilots 245's, just had the wheels off today and gave them a good clean up and noticed some cracking of the side walls (not horrendous big cracks but i think its done to the rear having no compliance ) ? any thoughts.

Cheers

[zola1]

Oop's Should have these pic's in

PORSCHE CUP 1 WHEEL April 08 009.jpg

PORSCHE CUP1WHEEL ET 49 April 08 007.jpg

Cheers

[Richy_S]

Derrick

They look like Mille Miglia wheels -had those on my S2.

As I recall I was running 255/40 & 225/50.

I dont think there is a lot you can do about the ride, its the way it is with 17's unless you spend £1500 on KW suspension.

968 caster mounts are advised.

Rich

[zola1]

Derrick

They look like Mille Miglia wheels -had those on my S2.

As I recall I was running 255/40 & 225/50.

I dont think there is a lot you can do about the ride, its the way it is with 17's unless you spend £1500 on KW suspension.

968 caster mounts are advised.

Rich

Cheers rich, thought as much,gonna do the castor mounts ,found some on the Hartech site for 35 pounds each cheapest by over 20 pounds each else where.

is'nt the AGM today ?

cheers

[zola1]

Derrick

They look like Mille Miglia wheels -had those on my S2.

As I recall I was running 255/40 & 225/50.

I dont think there is a lot you can do about the ride, its the way it is with 17's unless you spend £1500 on KW suspension.

968 caster mounts are advised.

Rich

Cheers rich, thought as much,gonna do the castor mounts ,found some on the Hartech site for 35 pounds each cheapest by over 20 pounds each else where.

is'nt the AGM today ?

cheers

Doh !! its the next week,