2.7 engine bits everything bar the head and above,

Sell, Swap and ask for Parts here. Traders and Breakers posts will be deleted.

Moderator: Moderators

Post Reply
ab54666
Posts: 129
Joined: Mon Oct 24, 2011 9:02 pm
TIPEC membership: 0

2.7 engine bits everything bar the head and above,

Post by ab54666 »

As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy
pauly
Posts: 1892
Joined: Sun Feb 24, 2008 7:16 pm
TIPEC membership: 0
Location: UK

Re: 2.7 engine bits everything bar the head and above,

Post by pauly »

ab54666 wrote:As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy
I wouldn't mind having the block, I'm miles from you in Cambs though.
ab54666
Posts: 129
Joined: Mon Oct 24, 2011 9:02 pm
TIPEC membership: 0

Re: 2.7 engine bits everything bar the head and above,

Post by ab54666 »

pauly wrote:
ab54666 wrote:As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy
I wouldn't mind having the block, I'm miles from you in Cambs though.
Cambridge is about 1hr 45 away from me, bring a big car and take the lot, you'll more than cover your fuel on seller other bits on!
pauly
Posts: 1892
Joined: Sun Feb 24, 2008 7:16 pm
TIPEC membership: 0
Location: UK

Re: 2.7 engine bits everything bar the head and above,

Post by pauly »

ab54666 wrote:
pauly wrote:
ab54666 wrote:As topic title, I bought a running 2.7 engine for the head, so have all the other parts left that I don't want, mostly stripped off except the main block still has the pistons and crank in it.

Come and collect form SE London, donation to charity is all thats required; if it's still around in a few weeks it's all going to the tip!

Cheers

Andy
I wouldn't mind having the block, I'm miles from you in Cambs though.
Cambridge is about 1hr 45 away from me, bring a big car and take the lot, you'll more than cover your fuel on seller other bits on!
I absolutely hate driving in London though, and my Mrs told me I've got to stop collecting garage ornaments :( .


What other bits? :)
ab54666
Posts: 129
Joined: Mon Oct 24, 2011 9:02 pm
TIPEC membership: 0

Re: 2.7 engine bits everything bar the head and above,

Post by ab54666 »

Basically I bought a 2.7 engine so it was the full engine with Alternator etc still on it, I removed the head and stripped it down but the rest is still left. Come down the M11 and through the blackwall tunnel, you don't need to go through central London.
pauly
Posts: 1892
Joined: Sun Feb 24, 2008 7:16 pm
TIPEC membership: 0
Location: UK

Re: 2.7 engine bits everything bar the head and above,

Post by pauly »

ab54666 wrote:Basically I bought a 2.7 engine so it was the full engine with Alternator etc still on it, I removed the head and stripped it down but the rest is still left. Come down the M11 and through the blackwall tunnel, you don't need to go through central London.
I did the same a few years ago, just kept the head and the block. I don't think there's much demand for the rest. Don't bin the short engine, if no one has it I'll get down there one day :) .
Big Tomm
Posts: 49
Joined: Sat Feb 18, 2017 5:10 pm
TIPEC membership: 0
Location: Rainham, Kent

Re: 2.7 engine bits everything bar the head and above,

Post by Big Tomm »

Is this still available?
pauly
Posts: 1892
Joined: Sun Feb 24, 2008 7:16 pm
TIPEC membership: 0
Location: UK

Re: 2.7 engine bits everything bar the head and above,

Post by pauly »

Big Tomm wrote:Is this still available?
There's a queue....
ab54666
Posts: 129
Joined: Mon Oct 24, 2011 9:02 pm
TIPEC membership: 0

Re: 2.7 engine bits everything bar the head and above,

Post by ab54666 »

No firm takers, so still up for grabs.
Big Tomm
Posts: 49
Joined: Sat Feb 18, 2017 5:10 pm
TIPEC membership: 0
Location: Rainham, Kent

Re: 2.7 engine bits everything bar the head and above,

Post by Big Tomm »

pauly wrote:
Big Tomm wrote:Is this still available?
There's a queue....
Is there? All I read was logistical related discussions as I didn’t want to step on toes. In which case can I join the queue?
ab54666 wrote:No firm takers, so still up for grabs.
I am just down the road from you. If my position in the queue reaches the front can you please let me know and I can arrange to pop up to you one evening.

Thanks.
ab54666
Posts: 129
Joined: Mon Oct 24, 2011 9:02 pm
TIPEC membership: 0

Re: 2.7 engine bits everything bar the head and above,

Post by ab54666 »

As far as I can see there is no queue, no one has said 'can I come and get it'

Big Tomm, pop on over one evening, drop me a PM with your details and i'll give you my address etc.
Toby944
Posts: 190
Joined: Thu Apr 07, 2011 2:34 pm
TIPEC membership: 0

Re: 2.7 engine bits everything bar the head and above,

Post by Toby944 »

Hello,

Is this still available?
Post Reply