Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Chip wizard
https://forums.tipec.net/viewtopic.php?f=7&t=2650		 Page 1 of 1
Author:  964russ [ Fri Feb 20, 2009 8:46 pm ]
Post subject:  Chip wizard
The white flash went for a re-map today, went from 252.6 to 278.9bhp.
Allso has removed the poor idle and stall issues, and drives a lot smoother.
Did find and sort a couple of problems thou, the acc pedal wasnt set correctly, wasnt on full even when pressed fully!
And sum complete DIC@HEAD had removed the vacum res :shock: !!! (WTF)
This ment the flap thing in the inlet didnt move so prevents full power in the upper rev range.
Ive been driving the car for all this time without full power!
I never knew this important part was missing.

The car now drives perfectly, its now got a power band like a 2 stroke motorcross bike :D
That i think is part due to the re-map, and allso the fully working engine.

All credit to Wayne at Chip Wizards, cracking job.
He spent time and effort on my car for no extra cost :thumbup:
Author:  lindsayhbrown [ Sat Feb 21, 2009 2:03 am ]
Post subject:  Re: Chip wizard
good news on the full power, nice increase to 279 horses, altho 250+ is good, was it previously modded ?
Author:  siggyNZ [ Sat Feb 21, 2009 2:15 pm ]
Post subject:  Re: Chip wizard
Was the 252 before or after he sorted the problems out?
Author:  964russ [ Sat Feb 21, 2009 3:52 pm ]
Post subject:  Re: Chip wizard
I think there supposed to be 250bhp standard.
My car has only the last silencer box and a k+n air filter.
Well happy :D
Author:  J.J. [ Sat Feb 21, 2009 3:53 pm ]
Post subject:  Re: Chip wizard
So what does it do at the Wheels? Think I need to go & see him soon. :) Sorry I didn't make it over. Didn't get through until 12.
Author:  Siggy [ Sat Feb 21, 2009 4:32 pm ]
Post subject:  Re: Chip wizard
So you have no idea what the remap archived then?
Author:  964russ [ Sat Feb 21, 2009 10:34 pm ]
Post subject:  Re: Chip wizard
I cant remeber wot the wheel bhp was, soz. With the messin about i didnt leave till 2.30ish.
The faulty/missing part does remove sum power, but this is top end rev power so dosnt affect a dyno to much. So even with a 95% throttle and a missing vacum valve thingy it still pulled 252.
Not bad IMO, but fixed and chipped 279 Big uns!
There was a 964 twin turbo there with 550bhp!!! Wayne had made an engine management system for it, loom ecu ect, everything. That chap knows everything about engines.
Its totally changed how my car peforms, well worth the £300.
Author:  demonfish [ Sat Feb 21, 2009 11:30 pm ]
Post subject:  Re: Chip wizard
Ramus sell the twin turbo conversion with 500bhp - £21k !!!!

I'd be happy with a rebuilt 3.8 running on motec with 320 at the wheels...
Author:  J.J. [ Sat Feb 21, 2009 11:44 pm ]
Post subject:  Re: Chip wizard
964russ wrote:
I cant remeber wot the wheel bhp was, soz. With the messin about i didnt leave till 2.30ish.
The faulty/missing part does remove sum power, but this is top end rev power so dosnt affect a dyno to much. So even with a 95% throttle and a missing vacum valve thingy it still pulled 252.
Not bad IMO, but fixed and chipped 279 Big uns!
There was a 964 twin turbo there with 550bhp!!! Wayne had made an engine management system for it, loom ecu ect, everything. That chap knows everything about engines.
Its totally changed how my car peforms, well worth the £300.


Bummer. Would have nipped over! Not expecting to get anything like yours but all I hear about this guy is good. Sure he can find a bit more from mine as well. Glad your happy with the results. :mrgreen:
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/