Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Flat spot sorted...........finally https://forums.tipec.net/viewtopic.php?f=7&t=120 |
Page 1 of 1 |
Author: | fury964 [ Wed Nov 14, 2007 1:46 pm ] |
Post subject: | Flat spot sorted...........finally |
Hurrah. It's done. Bloody O2 sensor. I now have my full rev range back again now that I have unplugged it. When I fit my CAT bypass I'll put a new one in but untill then it can run without. Only problem now is that it hunts when idling (which it did as well as having the flat spot) and sometimes cuts out. I've cleaned the idle control valve and that hasn't done anything, so I will wait untill my CAT bypass is in then have another play. |
Author: | Paul Mabley [ Wed Nov 14, 2007 3:46 pm ] |
Post subject: | |
Nice one Rob. Has the car got a MAF sensor, this would make it hunt. Try whipping it out and cleaning with electrical contact cleaner. |
Author: | fury964 [ Fri Nov 16, 2007 1:45 pm ] |
Post subject: | |
Hi Paul I'll try giving the MAF/Air Flow Meter a clean as you suggest as it's an easy thing to do, but seeing as I have taken it out and put it back three or four times so far (having tried three AFMs trying to find the flat spot) I think that it is fairly clean anyway. Any other ideas? |
Author: | EL Gordo [ Fri Nov 16, 2007 2:52 pm ] |
Post subject: | |
horrible things flat spots, ours is currently between 0 and 7000 rpm with no response whatsoever ![]() |
Author: | sam [ Sat Nov 17, 2007 7:22 pm ] |
Post subject: | |
dekandgord wrote: horrible things flat spots, ours is currently between 0 and 7000 rpm with no response whatsoever
![]() Yeah , have three flats in Caterham, they're in a pretty flat spot at the moment ![]() ![]() |
Author: | sam [ Sat Nov 17, 2007 7:24 pm ] |
Post subject: | |
dekandgord wrote: horrible things flat spots, ours is currently between 0 and 7000 rpm with no response whatsoever
![]() when you going to get that car on the road !!!!!!!!! I have to keep posting so I can see more piccies of Deks..............OOOOOOOOOOOOOO |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |