Porsche Enthusiasts Club Forum

It is currently Tue May 07, 2024 11:52 pm
Classic Line Insurance


All times are UTC [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Haynes Manual Translations
PostPosted: Mon Jul 09, 2012 8:23 am 
Offline
User avatar

Joined: Mon Sep 26, 2011 4:44 pm
Posts: 434
Location: West London
TIPEC membership: 0
Skype ID: kathyfoat
Haynes Manual Translations
(Author unknown, found on the Web)
Haynes: Rotate anticlockwise.
Translation: Clamp with visegrips then beat repeatedly with hammer counterclockwise.

Haynes: This is a snug fit.
Translation: You will skin your knuckles!

Haynes: This is a tight fit.
Translation: Not a hope in hell, bucko!

Haynes: As described in Chapter 7...
Translation: That'll teach you not to read through before you start; now you are looking at scary photos of the inside of a gearbox...

Haynes: Pry...
Translation: Hammer a screwdriver into...

Haynes: Undo...
Translation: Go buy a BIG can of WD40...

Haynes: Retain small spring...
Translation: "Jeez what was that, it nearly took my eye out!"

Haynes: Press and rotate to remove bulb...
Translation: "OK - that's the glass part off, now use some good pliers to dig out the base...

Haynes: Lightly...
Translation: Start off lightly and build up till the veins on your forehead are throbbing...

Haynes: Routine maintenance...
Translation: If it isn't broken... it's about to be!

Haynes: One spanner rating.
Translation: Your mother could do this... so how did you manage to botch it up?

Haynes: Two spanner rating.
Translation: Now you may think that you can do this because two is a low, tiny, little number... but you also thought the wiring diagram was a map of the Tokyo underground.

Haynes: Three spanner rating.
Translation: OK - but don't expect us to ride in it afterwards!

Haynes: If not, you can fabricate your own special tool like this...
Translation: Hahahahahahahahahahahahahahahahahahahahahaha!

Haynes: Compress...
Translation: Squeeze with all your might, jump up and down on, swear at, throw at the garage wall, then search in the dark corner of the garage for while muttering "Piece of Sh@t" repeatedly under your breath.

Haynes: Inspect...
Translation: Squint at really hard and pretend you know what you are looking at, then declare in a loud knowing voice to your wife, "Yep, as I thought, it's broke!"

Haynes: Carefully...
Translation: You are about to cut yourself.

Haynes: Retaining nut...
Translation: Yes, that's it, that big spherical blob of rust.

Haynes: Get an assistant...
Translation: Prepare to humiliate yourself in front of someone you know.

Haynes: Turning the engine will be easier with the spark pugs removed.
Translation: However, starting the engine afterwards will be much harder. Once that sinking pit of your stomach feeling has subsided, you can start to feel deeply ashamed as you gingerly refit the spark plugs.

Haynes: Refitting is the reverse sequence to removal.
Translation: But you swear in different places.

Haynes: Prise away plastic locating pegs...
Translation: Snap off...

Haynes: Using a suitable drift...
Translation: The biggest nail in your tool box isn't a suitable drift!

Haynes: Apply moderate heat...
Translation: Placing your mouth near it and huffing isn't moderate heat.

Haynes: Index
Translation: List of all the things in the book but the thing you want to do!

_________________
Current Rides: 1987 944 Porsche Turbo, Maraschino Red :cherry:
1985 VW Transporter, White
Previous Rides: 2000 Jeep Cherokee, 4L, White
1970 VW Bay Window Camper
1970 Semi Auto Beetle, Lowered, Diamond Blue, Cookie Cutters, Daily Driver from 1994-2007


Top
 Profile  
Reply with quote  
 Post subject: Re: Haynes Manual Translations
PostPosted: Sun Jul 15, 2012 7:32 pm 
Offline

Joined: Tue Sep 14, 2010 1:44 pm
Posts: 326
Location: Argyllshire
TIPEC membership: 6177
:bounce:

Many of these.... so true! I have the scars to prove it... :bounce:

_________________
Rob


1992 944 S2
1988 924S


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group