| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Highly recommended Porsche Specialist. https://forums.tipec.net/viewtopic.php?f=5&t=24617 |
Page 1 of 1 |
| Author: | 1Rockrocks [ Wed Nov 25, 2020 6:42 pm ] |
| Post subject: | Highly recommended Porsche Specialist. |
I have owned my 928S4 for about 25 years. Throughout those years it has been a real struggle to find decent standards of service from dealers and so-called specialists - whom have often created/made the problems worse. I would like to recommend an 928 specialist that is fully trustworthy and has vast amount of knowledge - thereby fixing properly previous bodges. I travel about 100 miles from Shrewsbury, and I know they have regular customers from London, because they are the best that I know of, and I have tried a lot;- Give Chris a call at Loe Bank Motors LTD, Bury, on 01706-826060. Also, excellent body shop next door is Mark at Bury Motor Body', on 07976-384227. Both these garages are honest and very reasonably priced for the quality of workmanship. |
|
| Author: | autonoob [ Tue Jan 12, 2021 9:00 am ] |
| Post subject: | Re: Highly recommended Porsche Specialist. |
I am not from the UK, but I hope that you will be able to get a client from this community. It will best if you will share your experience as well, as a lot of members here need insight from an experienced person like you. |
|
| Author: | 1Rockrocks [ Wed Jan 13, 2021 7:10 pm ] |
| Post subject: | Re: Highly recommended Porsche Specialist. |
Loe Bank Motors sorted out a faulty air conditioning system - that other so-called Porsche specialists had made worse. Also, they fixed the cooling fans fuse blowing fault. Replacing front brakes. Getting the limited slip differential working again - by installing the correct oil. Bury Motor Bodies resprayed the roof - which had gone very dull. The bonnet - due to corrosion around the washer jets. The shuttle panel - due to corrosion. The lower plastic protection plates are were coming adrift from the car doors and sills. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|