Porsche Enthusiasts Club Forum

It is currently Thu Jul 31, 2025 11:42 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: 996 RMS failure
PostPosted: Thu Oct 31, 2013 9:05 pm 
Offline

Joined: Fri Jun 08, 2012 12:17 pm
Posts: 16
TIPEC membership: 0
Hi all can anybody give me advice.
I have recently bought a 1998 996 C2 and after research on the known faults the RMS seal kept popping up. after inspecting the car there was no oil visable and the RMS was replaced by porsche sheffield on the 3.9.09 at 55k and i have the original invoice for the work.
That was good enough for me and i bought the car. after inspection today it looks like oil is leaking out the rms area. Do i have a come back to porsche for the fact the rms has lasted only 4 years????

Regards
rich


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Thu Oct 31, 2013 9:21 pm 
Offline

Joined: Wed Nov 07, 2007 11:43 am
Posts: 347
Location: Banbury
TIPEC membership: 4941
Unless it is actually dripping onto the floor and just looks like oil sweat, I wouldn't lose any sleep over it as it is unusual to find one that isn't weeping oil slightly.

_________________
Steve

986 Boxster S
F355 Challenge Evocation
F355 Spider Evocation
Audi A4 Avant 2.0TDI S-Line


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Thu Oct 31, 2013 9:31 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Nov 04, 2007 7:43 pm
Posts: 12842
Location: Chatham, Kent
TIPEC membership: 4190
Pretty much everyone I looked at sweats a bit. Unless it pees out then don't worry about it.

_________________
Jim

http://tipec.net/region_southeastlondon.php

2018 Mitsubishi Outlander PHEV
2005 Porsche Cayenne S SOLD
2000 Jeep Grand Cherokee SOLD
2010 Mazda MX5 Mk3.5 2.0 Sport Tech SOLD
2000 Porsche Boxster S SOLD
1987 Porsche 944
2019 Abarth 595C


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Thu Oct 31, 2013 9:36 pm 
Offline

Joined: Fri Jun 08, 2012 12:17 pm
Posts: 16
TIPEC membership: 0
that's put my mind at ease - thanks guys.


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Fri Nov 01, 2013 9:17 am 
Offline

Joined: Mon Nov 05, 2007 9:20 pm
Posts: 5427
Location: Tamworth
TIPEC membership: 4260
I think Porsche only give 2 year warranty on their parts

_________________
1986 911 Supersport in Silver (the new red).
2023 Hyundai Tucson in dark grey.
2014 Mazda 2, ZOOM ZOOM, its the wifeys, honest !


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Thu Nov 07, 2013 1:15 pm 
Offline

Joined: Fri Jun 08, 2012 12:17 pm
Posts: 16
TIPEC membership: 0
Took it in to specislist cars at malton. great set of lads there by the way highly recommended. they have confirmed a bad leak from the RMS.
the part number fitted by porsche sheffield starts with 997 which im lead to beleive is an upgrade that shouldnt fail.
Where do stand with porsche guys?


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Tue Nov 12, 2013 12:11 pm 
Offline

Joined: Mon Nov 05, 2007 3:35 pm
Posts: 2288
Location: Bournemouth
TIPEC membership: 3266
I think if it had failed within 2 years you would not have a problem, but 4 years is pushing it a bit on what Porsche will regard as a replaceable item.

Ideally, oil seals should be changed every 8 years, by that point they start going hard, and although yours is only 4 years old, on the one hand it should be ok, but then again, with extended oil change intervals these days, a car which could have seen some over revs logged by the DME (porsche will say the logged ones pushed the seal beyond its design tolerance), there is a good chance the main dealer who fitted it is off the hook.

If you are having the RMS replaced, also have the IMS bearing and seal plate replaced with one of the uprated ones, and if it has an internal seal, remove it, it is a lot cheaper to have this done while the RMS is replaced, rather than at a later date.. and if it fails, it can make a big mess of the engine.

_________________
Clean it, wax it, love it, ENJOY it... then fix it

Jon Mitchell
Independent Porsche Specialists
Technical Advisors to TIPEC
http://www.jmgporsche.co.uk
https://twitter.com/JMG_PORSCHE
http://www.facebook.com/jmgporsche


Top
 Profile  
Reply with quote  
 Post subject: Re: 996 RMS failure
PostPosted: Mon Jun 23, 2014 3:59 pm 
Offline

Joined: Mon Jun 23, 2014 3:48 pm
Posts: 1
TIPEC membership: 0
Hi Rich

Was this resolved in the end? What was the outcome? Sorry about the thread reserection but I was looking at your for sale advert


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group