Porsche Enthusiasts Club Forum :: View topic

Hi Lindsay,

On Rennlist I saw post about the proper interactive version of PET which you can download though Porsche frowns upon it. I understand from people who have installed it that clicking on a part brings up the price. You can allow it to update from Porsche servers whenever you launch it if you want, and it retrieves latest prices, deleted parts etc.

According to Rennlist latest version of Windows (it runs only on Windoze) breaks it if the machine is running in 32 bit mode or some arcane nonsense. The workround is not to allow the downloadable version to update the software, but just to retrieve prices.

Author:	lindsayhbrown [ Wed Apr 04, 2012 8:37 pm ]
Post subject:	Prices for parts on PET
I'm sure this topic has been raised before, but where can I find a price list for Porsche PET parts, thanks in advance

Author:	Mike968 [ Wed Apr 04, 2012 8:41 pm ]
Post subject:	Re: Prices for parts on PET
I don't know if a list is available... You could phone up an OPC for current prices or Design911 do a service on their websire where you type in the part number and it gives you the price (if the part's available..)

Author:	lindsayhbrown [ Wed Apr 04, 2012 8:46 pm ]
Post subject:	Re: Prices for parts on PET
Thanks, I'll try Design911's web site

Author:	stratfordshark [ Wed Apr 04, 2012 9:28 pm ]
Post subject:	Re: Prices for parts on PET
Hi Lindsay, On Rennlist I saw post about the proper interactive version of PET which you can download though Porsche frowns upon it. I understand from people who have installed it that clicking on a part brings up the price. You can allow it to update from Porsche servers whenever you launch it if you want, and it retrieves latest prices, deleted parts etc. According to Rennlist latest version of Windows (it runs only on Windoze) breaks it if the machine is running in 32 bit mode or some arcane nonsense. The workround is not to allow the downloadable version to update the software, but just to retrieve prices.

Author:	Brett928S2 [ Wed Apr 04, 2012 9:39 pm ]
Post subject:	Re: Prices for parts on PET
stratfordshark wrote: Hi Lindsay, On Rennlist I saw post about the proper interactive version of PET which you can download though Porsche frowns upon it. I understand from people who have installed it that clicking on a part brings up the price. You can allow it to update from Porsche servers whenever you launch it if you want, and it retrieves latest prices, deleted parts etc. According to Rennlist latest version of Windows (it runs only on Windoze) breaks it if the machine is running in 32 bit mode or some arcane nonsense. The workround is not to allow the downloadable version to update the software, but just to retrieve prices. Hi I have PET 7.1 which is the version with prices... As Adrian says its a pain to get working in 64 bit 7..... The prices are in Euros and as far as I can see are a "general guide only" IMHO ...as they seem to bear no real relation to actual prices at an OPC... All the best Brett

Porsche Enthusiasts Club Forum https://forums.tipec.net/

Prices for parts on PET https://forums.tipec.net/viewtopic.php?f=4&t=12693	Page 1 of 1

Author:	stratfordshark [ Thu Apr 05, 2012 8:18 am ]
Post subject:	Re: Prices for parts on PET
No they work fine Brett. They are in roubles or something as original software was Russian version. If you calibrate any price against known opc price you have conversion factor - all prices checked then accurate to pennies in my experience. It's invaluable to check whether worth bidding/buying on eBay, or saving on parts bought in US

Author:	lindsayhbrown [ Thu Apr 05, 2012 10:31 pm ]
Post subject:	Re: Prices for parts on PET
Went on Design 911 web site and it only came up with one of the nine parts I was after at silly price so will give it a miss will try elsewhere, thanks for all your advice

Page 1 of 1	All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/