Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
For sale or trade 993 cup2's https://forums.tipec.net/viewtopic.php?f=36&t=9607 |
Page 1 of 1 |
Author: | mav666 [ Thu Sep 30, 2010 4:20 pm ] |
Post subject: | For sale or trade 993 cup2's |
I'm currently runnign my 944 on 933 cup2's Bought them as I bought the car without wheels and just needed a set to get it up and running, but they are bigger than I want and i'd prefer to have D90's on the car. As its my daily drive I don't have the option to sell then buy another set at leisure so just wondering if anyone has a set of D90's that are 6" front 8" rear with the later 944 offset of 52.3, or a set of 16" teledials with the same offset. I'm not a huge fan of the cup2's whihc is why I'm reluctant to buy the spacers to level them up. Ideally if you wanted these for a 944 you should have 18mm rear spacers and 3mm front. Wheels are ET55 7" fronts with borderline Goodyear F1's, rears are 9" ET70 with 3-4mm Goodyear F1's Not in perfect condition, but 3 have very few marks rear o/s has a few scratches but again I've never had them refurb'ed as I never intended keeping them long term. Can upload pics if there is any interest They all have black and silver logo'd centre caps |
Author: | tr7v8 [ Thu Sep 30, 2010 5:39 pm ] |
Post subject: | Re: For sale or trade 993 cup2's |
Might be worth mentioning where you are. |
Author: | hotblack944 [ Thu Sep 30, 2010 7:03 pm ] |
Post subject: | Re: For sale or trade 993 cup2's |
mav666 wrote: if anyone has a set of D90's that are 6" front 8" rear with the later 944 offset of 52.3 Original sizes were 7" front and 8" rear, or 7.5" front and 9" rear with M030 suspension. The 6" front is from a 964. |
Author: | mav666 [ Sun Nov 07, 2010 4:45 pm ] |
Post subject: | Re: For sale or trade 993 cup2's |
Didn't know about the 6" ones only beiong 964 ![]() car is now fitted with D90s after a carpark swap in the Scottish Borders ![]() |
Author: | Lee 944 [ Sun Nov 07, 2010 6:59 pm ] |
Post subject: | Re: For sale or trade 993 cup2's |
Glad they are ok. What was the actual sizes you got again, I've lost the e-mail. I hope the tyres last, but you will have to get the tracking done very soon after seeing the tyres that came off. I look forward to getting the cup2's re-furbed and try them on the 928 as spares ( I'll keep the man hole covers for originality at shows and stuff ). If it had been your birthday soon, I might not have taken all that money off you and done a straight swap. Happy birthday mate. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |