FRONT - 9J X 18 H2 - ET40
REAR - 11J X 18 H2 - ET65
Stud Pattern 5 x 130.00
These wheels were made by RH (Germany) in the mid to late 90's and are virtually identical to the 'speedline for porsche' 3.6 rims - only wider! They have recently been removed from my low mileage 964 turbo. Due to their excessive width, these wheels are ideally suited to the wider bodied 911's. The RH 3.6 wheel's have a 5 spoke cast aluminium centre barrel with a spun aluminium outer rim. The centre sections are finished in metallic silver (powder coated I believe) whilst the rims have a highly polished / painted finish. The wheels take OPC centre caps and standard bolts.
The wheels are in excellent overall condition and are ready for use. All 4 centres are immaculate and as new. The rims have no curbing marks or damage at all. There are a few small areas of paint lift around some bolt heads but this is only noticeable at very close range. There are no signs of corrosion anywhere. There is no cracking or damage to the inner rims either. Whilst on the car, the tyre pressures remained stable with no slow leaks over time and the car drove perfectly straight and true. Tyre wear was also even.
These wheels are VERY WIDE, (wider than the 3.6 speedlines) so please ensure they would be suitable for your car.
I have more pictures to email if anyone is interested, or see piston head classified ad (parts) for more details.
£1,400.00
Simon
07971402872
| Attachments: |
|
wheels1.jpg [ 109.4 KiB | Viewed 2682 times ] |