| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944 S2 for breaking https://forums.tipec.net/viewtopic.php?f=36&t=6440 |
Page 1 of 1 |
| Author: | sulzeruk [ Thu Oct 15, 2009 12:48 pm ] |
| Post subject: | 944 S2 for breaking |
Hi all, I had recently bought a 1990 S2 to get back on the road but the tin worm is too bad so I have decided to break the car and put the money into my 1980 911 SC as that needs some wings and the slam panels done! Car has done 130,000 miles and I drove it home. Calipers and back axle have gone. Colour is Zermatt silver with the half cream / half black interior. Most parts still available. Drop me a PM or e-mail me at sulzeruk@yahoo.co.uk for your needs! Al Cowan |
|
| Author: | stepa1007 [ Thu Oct 15, 2009 1:14 pm ] |
| Post subject: | Re: 944 S2 for breaking |
sulzeruk wrote: Hi all, I had recently bought a 1990 S2 to get back on the road but the tin worm is too bad so I have decided to break the car and put the money into my 1980 911 SC as that needs some wings and the slam panels done! Car has done 130,000 miles and I drove it home. Calipers and back axle have gone. Colour was Silver Rose with the half cream / half black interior. Most parts still available. Drop me a PM or e-mail me at sulzeruk@yahoo.co.uk for your needs! Al Cowan Did you buy it off E-bay because I think I bid for the same one? Stephen |
|
| Author: | sulzeruk [ Thu Oct 15, 2009 5:49 pm ] |
| Post subject: | Re: 944 S2 for breaking |
Nope, wasn't on Ebay, Alasdair |
|
| Author: | sulzeruk [ Tue Oct 20, 2009 6:15 pm ] |
| Post subject: | Re: 944 S2 for breaking |
Still have loads of parts for this. Have a full stainless steel exhaust, engine is also being split, cams look perfect, still got to liberate them from the head, tomorrows job! Interior was very good, cream leather but fronts gone. |
|
| Author: | rav [ Tue Oct 20, 2009 7:39 pm ] |
| Post subject: | Re: 944 S2 for breaking |
Thanks for the parts you sent to me. They arrived yesterday as described. Just need to fit them now ..... |
|
| Author: | tr7v8 [ Tue Oct 20, 2009 7:48 pm ] |
| Post subject: | Re: 944 S2 for breaking |
sulzeruk wrote: Still have loads of parts for this. Have a full stainless steel exhaust, engine is also being split, cams look perfect, still got to liberate them from the head, tomorrows job! Interior was very good, cream leather but fronts gone. Al you have a PM? Are the driveshafts still there or did they go with the axle? |
|
| Author: | sulzeruk [ Wed Oct 21, 2009 2:16 pm ] |
| Post subject: | Re: 944 S2 for breaking |
Hi Jim, will get them off this afternoon for a lok. They seem to be OK with no splits in the boots from what I remember. They will be for sale, Alasdair |
|
| Author: | DavidL [ Thu Oct 22, 2009 2:16 pm ] |
| Post subject: | Re: 944 S2 for breaking |
rav wrote: Thanks for the parts you sent to me. They arrived yesterday as described. Just need to fit them now ..... Alasdair, The temp gauge was for me - looks fine, I'll pop it on one evening so fingers crossed. Thanks for the part and thanks to Rav for organising it. David |
|
| Author: | sulzeruk [ Mon Oct 26, 2009 2:19 pm ] |
| Post subject: | Re: 944 S2 for breaking |
Still got lots of goodies left. Nice pair of Alpine 6 x 4 door speakers anyone????? |
|
| Author: | sulzeruk [ Thu Oct 29, 2009 9:30 pm ] |
| Post subject: | Re: 944 S2 for breaking |
Removed the head and cams from the car today and it is in lovely condition. No marks on the cams at all and no hooking to the teeth! Head is in perfect nick, no marks on the cam caps at all. Looks like it has been burning well as all the exhaust valves are perfectly coloured! Tensioner assembly also perfect, £25! £250 for head inc cam caps and tappets £125 for cams Carriage for head is £25 to UK, cams are £12. Pics of all items available with a PM request! Alasdair |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|