| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| WANTED: Early 944 ECU and reference senders https://forums.tipec.net/viewtopic.php?f=36&t=5986 |
Page 1 of 1 |
| Author: | deacs [ Tue Sep 15, 2009 1:18 pm ] |
| Post subject: | WANTED: Early 944 ECU and reference senders |
Due to a non running problem that has been pretty much ruled out to be a faulty ECU or refence senders I am in urgent need of an ECU and reference senders for a 1983 944. I can pay instantly via paypal or can collect and pay cash if within 50-60 miles of plymouth devon |
|
| Author: | dawthan [ Tue Sep 15, 2009 4:42 pm ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
has the flywheel been checked for the 3 grub screws sticking out of the sides which give the reference... if not we had a problem with a turbo not so long ago when it turned out to be just the ecu.... ref sensors available from eurocarparts if needed. |
|
| Author: | deacs [ Tue Sep 15, 2009 5:58 pm ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
how would one go about checking the flywheel for these grub screws? I know that ive got a bit of a nightmare removing one of the reference senders, one came out easy the other one wont budge! |
|
| Author: | dawthan [ Tue Sep 15, 2009 6:30 pm ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
if you can get under the vehicle at all and turn the engine over by hand you can just view them through a gap on bell housing... but you may be able to see some through the hole where you have taken a ref sensor out... |
|
| Author: | hotblack944 [ Tue Sep 15, 2009 6:37 pm ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
I have two used ref sensors, if you still need them. |
|
| Author: | deacs [ Wed Sep 16, 2009 3:59 pm ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
what price are you looking at for them delivered |
|
| Author: | deacs [ Thu Sep 17, 2009 10:35 am ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
sensors now sorted thanks to hotblack 944, still in need of an ECU, anyone got one? |
|
| Author: | random-hero [ Tue Sep 22, 2009 8:14 am ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
Ive pm'ed you !! |
|
| Author: | nrwilliams [ Tue Oct 13, 2009 7:46 am ] |
| Post subject: | Re: WANTED: Early 944 ECU and reference senders |
If your still after an ECU I have one. Also an AFM and most of the other associated bits as breaking a 83 944. Thanks Neil |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|