Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Audi 01E gearbox and spline adapter https://forums.tipec.net/viewtopic.php?f=36&t=25060 |
Page 1 of 1 |
Author: | sgl1966 [ Fri Oct 21, 2022 6:52 pm ] | ||||
Post subject: | Audi 01E gearbox and spline adapter | ||||
Hi , just put the gearbox on ebay but thought I would offer it on here with a spline adapter for converting to 944 drive shaft . Its a 6 speed DQS 01e gearbox with the wide first gear for strength . The adapter has been made to connect the splined output from gearbox to 944/968 drive shaft . You need to make gearbox mounts , I have some early side mounts you could adopt . And you need to modify gear linkage. I was going to fit to my car but a 968 gearbox became available so fitting that instead . I would like to see someone actually complete the project . Looking for £650 which is what it cost me for gearbox and adapter . Couple of photos showing gearbox with adapter and another comparing it to 968 box . Collection only southampton area
|
Author: | Waylander [ Sat Oct 29, 2022 10:33 am ] |
Post subject: | Re: Audi 01E gearbox and spline adapter |
If you buy a quick shift for that 968 box, dont bin the linkage on the top, I will rebuild it for someone with a 968 and a sloppy change |
Author: | sgl1966 [ Sat Oct 29, 2022 8:35 pm ] |
Post subject: | Re: Audi 01E gearbox and spline adapter |
Hi Martin, never seen a short shift for a 968 , I am led to believe they do not operate as well as for the 944 box . |
Author: | sgl1966 [ Mon Apr 17, 2023 6:44 am ] |
Post subject: | Re: Audi 01E gearbox and spline adapter |
Still available |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |